HRMJ-W.FLP-ST1(40)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial connectors, or RF connectors, are the standard type of connection for most types of electronic hardware. Coaxial connectors are usually used to transmit radio frequency (RF) signals to and from various pieces of electronic equipment such as antennas, TVs, radios, amplifiers, and more. In addition, coaxial connectors are also used in telecommunications and computer networks, as well as medical, military, aerospace, automotive, and industrial applications.

The HRMJ-W.FLP-ST1 is a particular type of coaxial connector widely used in a variety of applications. This connector is commonly used in applications such as satellite and terrestrial television receivers. It is also the standard connector type for many types of high-end audio equipment.

The connector features an ST1 connection type and is rated to 40 Watts. The ST1 type connection is found with ST1 compatible cables and connections and provides a reliable and working connection. This type of connector is constructed with a male plug and female socket on each end. It is a type of unscrew-on connection so no tools are required for installation. The connector is then usually plugged into a receptacle or cable.

The connector is made of two main components - the inner conductor and the outer conductor. The center conductor, usually copper, is the line which carries the signal. This conductor is surrounded by a dielectric, such as a PTFE insulation material. Finally, the outer conductor is typically made up of a metal shield, such as copper or aluminum, and serves as a ground.

The connector then connects with the signal sources that usually require a coaxial connection. The signal sources may range from simple plug-in modules or wall plug-ins, to coaxial cables for connection to a TV, satellite system, or other type of multimedia device. The signal is then transferred from the source to the connector and then to the destination.

The working principle behind the HRMJ-W.FLP-ST1 connector is simple yet effective. The two conductors are kept apart from each other using a dielectric material such as PTFE. This helps to reduce interference from outside sources and thus allowing the signal to maintain its clarity and consistency. In addition, the outer conductor serves as a ground, providing a better connection between the two conductors and thus providing less signal loss.

The HRMJ-W.FLP-ST1 connector is a great solution for a variety of applications needing a reliable connection. The connector is easier to install than traditional coaxial connectors and has a lower signal loss. In addition, the connector is designed to be compatible with most types of coaxial cables. This makes it suitable for a variety of different applications, including home entertainment, medical equipment, satellite or terrestrial television receivers, and many other applications.

The specific data is subject to PDF, and the above content is for reference