HS300 5K F

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis mount resistors are components used to control the flow of electrical current in electrical and electronic circuits. They are commonly used to limit or adjust the level of current passing through a device in order to protect it from damage. They also become necessary when designing electric circuits to increase the reliability of the circuit overall. Different types of chassis mount resistors are available such as wirewound, metal film, surface mount film, carbon composition, etc. Among them, HS300 5K F is one of the popular types that offer a wide range of features.

HS300 5K F is a carbon film resistor suitable for both industrial and general purpose use. Its main components include a flat, spiral carbon or metal film wound around a continuous coil of wire, which is then sealed in a precision metal shell or outer casing. The terminal pins are attached to the outer casing. This type of resistor has the unique advantages of high power dissipation capability (5,000 watts), wide resistance tolerance (up to ± 5%), low temperature coefficient (below 100 ppm/°C), and excellent thermal shock resistance.

Most commonly, the applications of HS300 5K F chassis mount resistors include power amplifiers, buffering, switching, and signal buffers. They are also used in DC-DC converters, AC stabilizers, lightning protection circuits, and current limiting circuits. Moreover, these resistors are also suitable for robotics, HVAC systems, automotive, aerospace, and transportation equipment.

The working principle of an HS300 5K F chassis mount resistor is based on the age-old principle of electrical resistance. It consists of a continuous coil of wire, around which sits a layer of carbon film. This carbon film contains certain compounds with specific resistivity properties that affect the overall flow of electricity in the resistor. When a voltage is applied across the resistor, a current flows through it and the intensity of this current is determined by the resistance of the element. The size of the resistor determines the amount of current that can pass through it while the resistance is determined by the amount of material or substance in the element.

In order to get the most out of these components, it is important to choose the correct resistor for the specific application. Caution must be taken when choosing the resistor model as oversizing leads to the wastage of energy while undersizing can adversely affect the performance of the circuit. Therefore, care must be taken while selecting the right HS300 5K F chassis mount resistor for the job.

The specific data is subject to PDF, and the above content is for reference