HSA501K8J

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis Mount Resistors provide an electrical component built to mount on the outside of a chassis, usually for long term service, that can regulate electrical current flow. The HSA501K8J is a type of chassis mount resistor, designed to help dissipate large amounts of current in an efficient, safe manner. This application\'s field and working principle is discussed in further detail in this article.

In general, the purpose of a chassis mount resistor is to provide overcurrent protection and assist in controlling the frequency of operation of the current involved. HSA501K8J resistors are specifically designed to limit high inrush or surge current during operation. This powerful application requires a high-performance environment and rigorous safety protocols.

In terms of its physical dimensions, the HSA501K8J is a ceramic-encased resistor with a metal mounting bracket on the outside. This allows for its direct mounting onto the chassis. For increased insulation and protection against high temperatures, it features a 10mm thick board of high-temperature material on the outside. This thick insulation ensures maximum surge current protection and reliability.

From a technical standpoint, the HSA501K8J is a 4-pin device with a rated power of 475 Watts and a maximum surge current of 4500 Amps. It is also designed with a blast time of 0.001s and a maximum continuous operating temperature of 150°C. It is available in 5.5K and 8K resistance values with a maximum contact resistance of 0.15 ohms and a minimum resistance of 0.1 ohms.

The working principle of the HSA501K8J is straightforward. When an unusually high surge current is detected, the resistor is instantly activated, allowing the current to flow through it and dissipate some of the energy in the form of heat. The resistor is designed to withstand the high surge current, allowing it to dissipate the energy before it causes any damage.

When the surge current subsides, the resistor will reset itself automatically and remain in a standby mode, ready to respond to the next surge. This cycle will continue until the original source of the high surge current has been eliminated.

The HSA501K8J is suitable for a range of applications, from motorcycles and cars to home electronics and industrial equipment. In each situation, it can be used to provide reliable and consistent overcurrent protection against high surge currents.

Overall, the HSA501K8J is a powerful chassis mount resistor designed to provide overcurrent protection and support high surge current requirements. Its 4-pin design, thick insulation, and high maximum temperature rating ensure its reliable performance. As a result, it is suitable for a variety of application fields and continues to be a popular choice for circuit protection.

The specific data is subject to PDF, and the above content is for reference