![HSC-AFL3-S1-D3 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | HSC-AFL3-S1-D3-ND |
Manufacturer Part#: |
HSC-AFL3-S1-D3 |
Price: | $ 5.68 |
Product Category: | Uncategorized |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | FIBER OPTIC RECEP |
More Detail: | N/A |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | $ 5.15970 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
HSC-AFL3-S1-D3 is a high-precision displacement sensor designed for point-level monitoring applications. It utilizes Rapid Pulsed Measurement (RPM) technology to measure and report displacements or relative positions within a highly accurate range. This technology overcomes many of the pitfalls of other methods, such as variable speed motion, high vibration levels, and environmental disturbances.
The HSC-AFL3-S1-D3 uses advanced sensing technology to measure displacements. It records the position of moving parts or objects with an accuracy that is far higher than traditional displacement sensors. Its operation is based on measuring the time it takes for a beam of light to pass between two points. This beam of light is driven through a set of reflecting mirrors and a hollow optical core. As the measured object moves, the relative position of the object is calculated based on the time it took for the beam of light to travel from one point to the other.
The sensing signal used in HSC-AFL3-S1-D3 is generated from a laser diode. This laser diode is attached to a controller board, and it plays a vital part in the operation of the sensor. The laser light is sent from the diode through an optical fiber, where it is reflected off mirrors which are arranged along the fiber. The reflected beam is then received on a receiver head, where it is collected and compared with the original laser beam. The difference between the two readings is then used to calculate the displacement of the measured object.
In addition to its precision sensing capabilities, the HSC-AFL3-S1-D3 also includes multiple feedback interfaces. This system includes both digital and analog outputs, as well as a variety of interface ports. This allows the user to configure the system to their specific application requirements. The feedback interfaces also offer the ability to monitor the position of the measured object in real time.
The HSC-AFL3-S1-D3 is designed to provide a reliable, accurate, and robust solution for point-level displacement monitoring applications. Its high-precision measurements eliminate the need for expensive sensors, making it a cost-effective solution. It also includes a variety of feedback interfaces, making it easy to integrate into any automation system. With its advanced sensing technology, the HSC-AFL3-S1-D3 is the ideal displacement sensor for a wide variety of point-level monitoring applications.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
![VS-95-9928PBF Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
CB 6C 6#16 SKT RECP
![CA3100E18-12SBA176F42F80 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
CA08COME36-3PB-44
![CA08COME36-3PB-44 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
CA-BAYONET
![CA06SST02-24-5PBF80 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
CB 6C 6#16S SKT PLUG
![CA06EW14S-6SBF80TL05 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
CAC 3C 3#16S SKT RECP LINE
![CA01COME14S-7SB Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)