Allicdata Part #: | HSMS-270P-TR1G-ND |
Manufacturer Part#: |
HSMS-270P-TR1G |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Broadcom Limited |
Short Description: | DIODE RF SCHTKY 15V 750MA SOT363 |
More Detail: | RF Diode Schottky - 1 Bridge 15V 750mA 825mW SOT-3... |
DataSheet: | HSMS-270P-TR1G Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Diode Type: | Schottky - 1 Bridge |
Voltage - Peak Reverse (Max): | 15V |
Current - Max: | 750mA |
Capacitance @ Vr, F: | 6.7pF @ 0V, 1MHz |
Resistance @ If, F: | 650 mOhm @ 100mA, 1MHz |
Power Dissipation (Max): | 825mW |
Operating Temperature: | 150°C (TJ) |
Package / Case: | 6-TSSOP, SC-88, SOT-363 |
Supplier Device Package: | SOT-363 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
HSMS-270P-TR1G Application Field and Working Principle
HSMS-270P-TR1G is a small-signal RF schottky diode integrated with a capacitor and a resistor inside a plastic SMD package. HSMS-270P-TR1G is commonly used as a mixer, detector, amplitude modulator, phase detector, and voltage regulator.
The working principle of the HSMS-270P-TR1G diode is quite simple. The diode is connected to its own bias circuit, which utilizes a resistor and a capacitor in series with the diode. When an AC voltage is applied across the diode, the capacitor charges and the resistor passes current to the diode. As the voltage is increased the resistor starts to limit the amount of current flowing through the diode.
The diode is reverse-biased which allows a small amount of current to flow through the diode due to its capacitance. This current will increase as the applied voltage increases, allowing the diode to act as a voltage regulator. The voltage drop across the diode will remain constant as long as the current is limited by the resistor.
The HSMS-270P-TR1G is also commonly used as a mixer in RF circuits. When a RF signal is applied to the diode, the capacitor will start to charge and the resistor will pass current to the diode. The current flow through the diode will mix the RF signal with the DC voltage which will modulate the RF frequency and create an amplitude shift in the signal.
The HSMS-270P-TR1G is also commonly used as a phase detector. When two RF signals of different frequencies are applied to the diode, the DC voltage will modulate the RF frequencies and create a phase shift. The phase shift can be used to measure the difference in frequency between the two signals.
The HSMS-270P-TR1G is also commonly used as a detector in RF circuits. When an RF signal is applied to the diode, the capacitor will start to charge and the resistor will pass current to the diode. The voltage drop across the diode will be different for different RF frequencies and can be used to detect the frequency of the RF signal.
The HSMS-270P-TR1G is also commonly used as an amplitude modulator. When an RF signal is applied to the diode, the DC voltage will modulate the amplitude of the RF signal. This will create an amplitude shift in the signal, which can be used to modulate the RF frequency.
In conclusion, the HSMS-270P-TR1G is a versatile small-signal RF schottky diode which has numerous application fields, including but not limited to, mixer, detector, amplitude modulator, phase detector, and voltage regulator. Its simple working principle based on current and voltage flow allows it to be used in numerous applications.
The specific data is subject to PDF, and the above content is for reference
DIODE SCHOTTKY RF 70V 1A SOT-363RF Diode...
DIODE PIN GP 50V 1A MINIPAKRF Diode PIN ...
DIODE PIN 50V 100MA SOD-323RF Diode PIN ...
DIODE PIN HF SW 30V 100MA VMN2RF Diode P...
DIODE SCHOTTKYRF Diode Schottky - Single...
DIODE PIN 60V 100MA EMD2 TRRF Diode PIN ...