Allicdata Part #: | 516-1920-ND |
Manufacturer Part#: |
HSMS-2818-BLKG |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Broadcom Limited |
Short Description: | DIODE SCHOTTKY GP LN 20V SOT-143 |
More Detail: | RF Diode Schottky - 1 Bridge 20V 1A SOT-143-4 |
DataSheet: | HSMS-2818-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Strip |
Part Status: | Obsolete |
Diode Type: | Schottky - 1 Bridge |
Voltage - Peak Reverse (Max): | 20V |
Current - Max: | 1A |
Capacitance @ Vr, F: | 1.2pF @ 0V, 1MHz |
Resistance @ If, F: | 15 Ohm @ 5mA, 1MHz |
Operating Temperature: | 150°C (TJ) |
Package / Case: | TO-253-4, TO-253AA |
Supplier Device Package: | SOT-143-4 |
Base Part Number: | HSMS-2818 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HSMS-2818-BLKG belongs to a special class of diodes: RF (Radio Frequency) diodes. These types of diodes have been around since the 1940s and have been used in various types of electronic circuits since then. The HSMS-2818-BLKG is an RF diode designed for use in wireless systems. It is designed specifically for operating in the low end of the frequency spectrum and has a wide range of applications in radio frequency systems.
The HSMS-2818-BLKG is an important component in any wireless system. It\'s used to create RF signals that can be used to send and receive data or audio signals over the airwaves. It is a general-purpose RF diode that is used to receive and transmit any type of data or audio information. The diode is made up of two layers: the n-type and the p-type layers. These two layers are connected at the junction, which is referred to as the “diode”. This diode is then used to control the intensity of the RF signal.
In order for a wireless system to transmit and receive data successfully, the HSMS-2818-BLKG must be properly configured. This involves adjusting the bias voltage to the correct voltage, as well as calibrating the diode so that the correct amount of current can pass through it. The diode must also be matched for the particular frequency being used in the system. once these calibration steps have been taken, the diode can then be used to create the RF signals necessary for wireless communication.
The HSMS-2818-BLKG is also used in applications such as frequency synthesis, amateur radio, and digital television. Frequency synthesis is the process of creating new frequencies using components like resistors, capacitors, and inductors, which are then connected to the diode. Amateur radio is a type of radio frequency communications, and the diode can be used to create the necessary signals to communicate. Digital television also uses the diode to create the required RF signals. In addition, the HSMS-2818-BLKG is also a popular component in consumer electronics products, such as cellphones and televisions.
The HSMS-2818-BLKG has a variety of applications, but its most important application is in wireless communication. The diode has a wide range of frequency operations, and is designed for low power operations, making it ideal for use in wireless communication. It is also designed for use in television, radio frequency equipment, and other consumer electronics. The overall performance of the HSMS-2818-BLKG is high, making it a popular choice among engineers and consumers alike.
The specific data is subject to PDF, and the above content is for reference
DIODE SCHOTTKY RF 70V 1A SOT-363RF Diode...
DIODE PIN GP 50V 1A MINIPAKRF Diode PIN ...
DIODE PIN 50V 100MA SOD-323RF Diode PIN ...
DIODE PIN HF SW 30V 100MA VMN2RF Diode P...
DIODE SCHOTTKYRF Diode Schottky - Single...
DIODE PIN 60V 100MA EMD2 TRRF Diode PIN ...