Allicdata Part #: | HSMS-2863-BLKG-ND |
Manufacturer Part#: |
HSMS-2863-BLKG |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Broadcom Limited |
Short Description: | DIODE SCHOTTKY DETECT HF SOT-23 |
More Detail: | RF Diode Schottky - 1 Pair Common Anode 4V SOT-2... |
DataSheet: | HSMS-2863-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Diode Type: | Schottky - 1 Pair Common Anode |
Voltage - Peak Reverse (Max): | 4V |
Capacitance @ Vr, F: | 0.3pF @ 0V, 1MHz |
Resistance @ If, F: | -- |
Operating Temperature: | 150°C (TJ) |
Package / Case: | TO-236-3, SC-59, SOT-23-3 |
Supplier Device Package: | SOT-23-3 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The HSMS-2863-BLKG is a small, surface-mount device that is used in the field of radio frequency (RF) communications. It is a diode that is designed to rectify the radio frequency signal, allowing it to be further processed or used. It is used in a variety of applications, including cellular and satellite communications systems, GPS systems, and antenna amplifiers. The HSMS-2863-BLKG is available in a variety of packages, including SMD, metallized, and through-hole.
The HSMS-2863-BLKG has a wide range of uses in the RF field. It is used for applications such as low-noise amplifiers, path loss measurements, signal conditioning and enhancement, and RF repeaters. It is often used as a mixer to bridge the gap between the baseband signals and the higher frequency signals required for reception and transmission. In addition, it can be used in combination with other components to create low-noise amplifiers and low-power amplifiers. The device is also used in the power amplifier industry, where it is used to decrease noise and distortion in the high-power devices.
The working principles of the HSMS-2863-BLKG are based on the rectification of the RF signal. This is accomplished through two main components: the input mouthpiece and the output port. The rectified signal is then sent out through the output port, typically via a coaxial cable. In order to ensure that the signal is properly rectified and filtered, the correct impedance must be applied between the input port and the output port. This can be accomplished through the use of a special resistor, or with the use of a balun transformer.
In order to ensure that the signal is of the highest quality possible, the HSMS-2863-BLKG is usually equipped with a built-in voltage regulator. This helps to ensure that the input and output signals are within the proper voltage range for optimal performance. Additionally, the device also utilizes a low reverse recovery time and low forward recovery time, which helps to reduce distortion.
The HSMS-2863-BLKG is a very versatile diode that can be used in many different RF applications. It is available in a variety of packages, including SMD, metallized, and through-hole. It is also capable of being used in low-noise amplifiers and low-power amplifiers. The device also features a built in voltage regulator, allowing for optimal performance when used in applications such as path loss measurements and signal enhancement. Finally, the HSMS-2863-BLKG is capable of providing low reverse recovery time, which helps to reduce distortion in the signal.
The specific data is subject to PDF, and the above content is for reference
DIODE SCHOTTKY RF 70V 1A SOT-363RF Diode...
DIODE PIN GP 50V 1A MINIPAKRF Diode PIN ...
DIODE PIN 50V 100MA SOD-323RF Diode PIN ...
DIODE PIN HF SW 30V 100MA VMN2RF Diode P...
DIODE SCHOTTKYRF Diode Schottky - Single...
DIODE PIN 60V 100MA EMD2 TRRF Diode PIN ...