Allicdata Part #: | HSMS-8207-BLKG-ND |
Manufacturer Part#: |
HSMS-8207-BLKG |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Broadcom Limited |
Short Description: | DIODE SCHOTTKY MIXER 4V SOT-143 |
More Detail: | RF Diode Schottky - 2 Pair Series Connection 4V 7... |
DataSheet: | HSMS-8207-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Diode Type: | Schottky - 2 Pair Series Connection |
Voltage - Peak Reverse (Max): | 4V |
Capacitance @ Vr, F: | 0.26pF @ 0V, 1MHz |
Resistance @ If, F: | 14 Ohm @ 5mA, 1MHz |
Power Dissipation (Max): | 75mW |
Operating Temperature: | 150°C (TJ) |
Package / Case: | TO-253-4, TO-253AA |
Supplier Device Package: | SOT-143-4 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
HSMS-8207-BLKG is a type of diode used in radio frequency (RF) applications. It is a three terminal semiconductor device which acts as a fusible link that can disconnect a power supply in the event of overload. The HSMS-8207-BLKG is a low-power type of diode, and is often referred to as a “hot lug”. The HSMS-8207-BLKG has three terminals, each providing different functions.
The anode (positive terminal) of the diode is used to connect the device to the power supply and provides a path for current to flow. The cathode (negative terminal) is connected to ground and is used to dissipate heat away from the diode. The third terminal is the trigger or gate terminal, and this is used to activate the diode by sending a voltage pulse to it from an external source. When the voltage pulse is applied, it causes the diode to go into conduction and the current flows from the anode to the cathode.
The working principle of the HSMS-8207-BLKG diode is relatively simple but very important for its applications. When a voltage is applied to the diode, a forward current flows through it and the diode starts conducting electricity. The forward current causes a voltage drop across the diode due to the internal resistance of the diode. This voltage drop is what causes the junction between the anode and cathode to become hot, and this is how the device acts as a fusible link.
The HSMS-8207-BLKG is mainly used as a high-current protection device in power supplies, and its main function is to disconnect the power supply in the event of an overload. The diode works by sensing an overload condition, and when this occurs the voltage across the diode causes it to heat up and go into conduction. This causes the current to be diverted away from the power supply and the circuit to be protected from any overload.
The HSMS-8207-BLKG can also be used in RF applications, such as radio frequency antennas. The diode can be used to control the directionality of the antenna by directing radio signals in the required direction. The diode can also be used to improve the gain of certain antennas by controlling the flow of currents. In addition, the diode can be used in wireless communication systems to improve signal-to-noise ratios.
The HSMS-8207-BLKG is a relatively simple diode but is capable of handling a wide range of current loads and frequencies, making it suitable for both power and RF applications. The diode has excellent performance and is relatively inexpensive, making it a great choice for a wide range of electronic systems.
The specific data is subject to PDF, and the above content is for reference
DIODE SCHOTTKY RF 70V 1A SOT-363RF Diode...
DIODE PIN GP 50V 1A MINIPAKRF Diode PIN ...
DIODE PIN 50V 100MA SOD-323RF Diode PIN ...
DIODE PIN HF SW 30V 100MA VMN2RF Diode P...
DIODE SCHOTTKYRF Diode Schottky - Single...
DIODE PIN 60V 100MA EMD2 TRRF Diode PIN ...