HV219PJ-G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Technological advancements have ensured that the HV219PJ-G analog switch has become increasingly popular in the market. This particular device belongs to the interface – analog switches – special purpose category and offers high performance, low power, and low voltage operations in applications such as signal routing, remote sensing, data acquisition, high frequency signal filtering, and telecom switching. It basically enables the connection of various points between two circuits without deteriorating the signal quality.

It is a single-pole, double-throw (SPDT) switch that has two signal inputs, one signal output, and three control signals, including an enable signal (ENBL). Depending on the conditions of these control signals, HV219PJ-G can be set to operate in either a pass (follow mode) or a latched (latch mode) condition. In the pass condition, the signal passes through the enable pin, while in the latched condition, the enable signal is ignored, and the signal is forced to pass through one of the signal inputs.

The HV219PJ-G analog switch offers superior on-resistance of just 11 Ω (typical) at a single +3.3-V supply. Its signal- noise ratio remains as high as 75 dB (maximum). It is also very power efficient due to its low quiescent current (1.5 µA). The device comes with an automatic low-power shutdown mode that helps save power when the switch is not in use. This mode is controlled by the enable pin, so it can easily be turned on and off when needed.

The HV219PJ-G analog switch also offers a wide operating temperature range between -40 and +85 °C. It can accommodate input voltages as high as ±15 V with a ±3.3-V maximum output voltage. The device also features excellent signal integrity, with low input leakage currents and high signal-to-noise ratios. All of these features make the HV219PJ-G ideal for applications such as wireless modems, power-saving smart sensors, audio systems, and automotive systems.

When it comes to the actual working principle of the HV219PJ-G analog switch, it depends upon its linear switching architecture. This architecture requires three separate voltage levels for signal isolation, meaning that the input and output aren’t directly connected. Instead, the switch operates by means of connecting the signal input to the signal output when the enable signal is turned on. When it is turned off, the signal outputs are turned off.

The switch is built with a non-blocking architecture, which means that several switches can be connected together and operated from a single control signal. This allows for a higher level of signal integrity, since the signal is passed through multiple switches, reducing the number of signal transfer errors. Another advantage of the non-blocking architecture is that it allows multiple switches to be operated simultaneously by a single control signal.

This is the same with the HV219PJ-G, which can be operated in both pass and latch modes, allowing for enhanced signal routing options. The switch also comes with two programmable pins – one for the polarity of the enable (ENBL) signal, and another for the logic level. This allows the switch to be configured to accept a variety of different logic levels, allowing for greater flexibility.

Overall, the HV219PJ-G analog switch from FTDI provides superior signal integrity, low power consumption, flexibility, and wide operating temperature range, making it a highly popular choice for various types of applications, including signal routing and data acquisition.

The specific data is subject to PDF, and the above content is for reference