HVA08JA1G00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

The HVA08JA1G00 is a type of through-hole resistor, also known as a pin-through-hole resistor. This type of resistor is a metal-oxide ceramic component that creates an electrical circuit through a contact pin. The resistor has a high resistance value and provides an effective way to control current flow in high frequency electronic circuits. It does this by limiting the current to a predetermined value and/or preventing power surges.

As with all resistors, the HVA08JA1G00 works by using the flow of electricity to create a magnetic field. This magnetic field is used to alter the resistance of the material in the resistor, thus controlling how much current will flow through the circuit. The resistor must be placed in the correct position and orientation to ensure the correct current is being controlled. This is achieved by using two pins that protrude out from the surface of the resistor.

As for its application field, the HVA08JA1G00 is suitable for a range of uses including acting as a current limiter, a voltage regulator, or as an audio frequency signal separator. It can also be used for protection from surges and short circuits. It is commonly used in power supplies, LED lighting, industrial electronics, telecom applications, and signal amplification.

The operating temperature range for this resistor is -55°C to +105°C with a maximum power of 1W. The insulation resistance ranges from 0.5MΩ to 5.0MΩ and the capacitance range is 2.8pF to 4.0pF. The dielectric strength is 300 VRMS and the maximum voltage is 500 V.

It is important to ensure the correct kind of environment for this through-hole resistor. This means avoiding high levels of corrosion and ensuring unpolluted air with low ozone concentration rates. Furthermore, the environment must be free from oily vapours and gases that can have an effect on the component. Care must also be taken when soldering to prevent any damage to the pins or the resistor body, again keeping in mind that soldering must take place in a clean environment.

In conclusion, the HVA08JA1G00 is a type of through-hole resistor that can be used in a wide variety of electronic circuits. It has a high resistance value and provides an effective way to control current flow in high frequency electronic circuits. Furthermore, with the correct environmental conditions, this component can function reliably over prolonged periods, making it a great choice for many applications.

The specific data is subject to PDF, and the above content is for reference