HVR2500003833FR500

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are commonly used in electrical circuits where resistive elements need to be mounted directly on to a PCB or other surface mountable device. They are a passive component that exhibits resistance to the electric current flowing through them. They are used to limit the current, to reduce voltage levels, or to protect electric circuits from unwanted signals. Today, through hole resistors are widely used in the electronics industry for a variety of tasks, from providing basic resistance to improving the performance of other components.

HVR2500003833FR500 Application Field and Working Principle

The HVR2500003833FR500 resistor is a surface mount device, designed to be used in high-frequency applications. It is made with two layers of copper foil on a high-grade ceramic substrate. The foil layers are insulated from each other, and the resistor is sealed with gold plating. The resistor can be used in a variety of circuits, from radio frequency amplifiers to switching regulators, and is intended for applications where high power frequency is required.

The resistor\'s working principle is fairly simple. As the electric current flows through the resistor, it applies a resistive force across the wire, reducing the current flow and the voltage of the circuit. This resistance creates heat, which is dissipated through the resistor\'s heat sink. The resistor\'s resistance can range from a few ohms to thousands of ohms, allowing it to be used in a wide range of applications from low-voltage to high-voltage circuits.

The resistor\'s maximum power rating is 1W, allowing it to be used at high frequencies and power levels. In order to maintain its effectiveness, the resistor must be properly installed and connected. It also needs to be protected from vibration, EMI interference, and electrical surges.

In short, the HVR2500003833FR500 is a high-frequency, surface mount resistor, designed to be used in circuits where high-frequency signals and power are needed. The resistor\'s working principle is straightforward and its resistance can range from a few ohms to thousands of ohms, allowing it to be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference