HVR2500006653FR500 Resistors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are an essential and reliable component in many electrical and electronic circuits, and HVR2500006653FR500 is no exception. It is designed for use in a variety of applications, from consumer electronics to industrial automation. It is typically used in circuits where a precise amount of resistance is needed over a certain range of operating voltages or over a certain temperature range. It is also used for potential divider circuits to control voltage level and current flow.

HVR2500006653FR500 is a through hole resistor, which is typically a cylindrical cylinder with a solid wire or metal foil wrapped around it. The metal wire or foil that wraps around the cylinder is an isolator, while the copper conductor inside the cylinder is the resistive element. The isolator helps prevent signal leakage, while the resistive element reduces or increases the electric current in the circuit depending upon the resistance value. The resistor also acts as a buffer, providing protection against electrical spikes, voltage transients, and circuit overloading.

The resistor is identified by the color bands on its body. The HVR2500006653FR500 has three bands with blue, gold and silver colors. The first two bands indicate the resistance followed by the multiplier. The third color band indicates the tolerance which in this case is ±5%. This means that the resistor can vary between the specified value by plus or minus five percent.

The resistance of the HVR2500006653FR500 is 250 Ohms, with a maximum power rating of 0.5 Watts. It has a temperature coefficient of ±100ppm/K and a temperature range of -55°C to +150°C. It also has a dielectric strength of 3KV and a self inductance of 1uH.

The HVR2500006653FR500 is used in many applications including current sensing, DC-DC converters, switching power supplies, motor control, voltage regulation, and audio systems. It is also used as a voltage divider to adjust voltage levels or to supply power to two circuits. Another popular application is in the protection of sensitive circuits against voltage transients. The resistor can also be used as a current source in an IC circuit, such as a logic circuit.

The working principle of the HVR2500006653FR500 through hole resistor is based on the fact that it creates a resistive force against the flow of current through the circuit when a voltage difference is established across the resistor. This resistance is determined by the geometry of the resistor, as well as the materials used. The resistance increases proportionally with the length of the resistor and the cross sectional area of the material used to make it.

HVR2500006653FR500 through hole resistors are extremely reliable and can be expected to work for many years with little or no maintenance. They are also an economical choice when compared to other types of resistors. Due to its high resistance, low cost, and reliability, it is widely used in industrial and consumer electronics applications.

The specific data is subject to PDF, and the above content is for reference