HVW1\210M00MLB

Series:	HVW
Packaging:	Bulk
Part Status:	Active
Resistance:	10 MOhms
Tolerance:	±20%
Power (Watts):	1W
Composition:	Carbon Film
Features:	High Voltage
Temperature Coefficient:	--
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.155" Dia x 0.545" L (3.94mm x 13.84mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A HVW1\210M00MLB is a type of through hole resistor, which are a type of electrical component used to resist the flow of current, providing stability to a circuit’s voltage, current, and power. The resistance value of a through hole resistor is measured in ohms, and may range from fractions of an ohm up to tens of thousands.Through hole resistors come in many sizes, shapes, and resistance values. Generally, a through hole resistor is a cylindrical piece of ceramic material that has metal electrodes sticking out the ends. The resistors come in different values, usually marked by colored bands printed around the resistor body. The type of through hole resistor refers to the way in which the resistor is mounted. Among the most common types are the leaded, axial, vertical mount, and surface mount resistors.Leaded resistors are the most common and the easiest to install. These resistors have two metal leads that protrude from either end of the resistor body that attach either directly or with a clip to the circuit board or point of connection. Axial resistors are a type of leaded resistors that are even easier to install as they have two internal clips built into the resistor, allowing it to attach directly to any board. Vertical mount resistors are similar to axial resistors but require more installation space as they are slightly taller. These resistors are soldered directly onto the board just like axial resistors, but require more vertical room due to their size. Lastly, surface mount resistors are a type of through hole resistor that requires no soldering as the leads on this type of resistor are short and are actually placed on the surface of the circuit.From the descriptions provided, a HVW1\210M00MLB is an axial type of through hole resistor that has two clips built in to the resistor itself. The resistor is cylindrical in shape and is typically marked with printed bands in order to measure the resistance value in ohms.When choosing a through hole resistor, one must consider the resistance value, voltage rating, power rating, and physical size. It is important to select a resistor that meets the specifications of the application. Typically, through hole resistors with low power ratings are used in audio amplifiers and switches, while through hole resistors with higher power ratings are used in motor controls, power supplies, and battery charging controllers.The working principle of a through hole resistor is that electricity passing through it dissipates in the form of heat, thus creating an electrical resistance. This resistance reduces the current flow, ultimately controlling voltage levels in the circuit. Generally, the more heat generated by the resistor, the higher its resistance will be. The heat generated must be kept in check in order to prevent any damage to the resistor.Lastly, through hole resistors have many different applications and can be used to reduce noise, minimize the emergence of spikes, and often limit the current flow to avoid any damage to the component or circuit itself. HVW1\210M00MLB is an ideal choice for applications that require a higher power rating but still need a reliable resistance value. It is important to remember to use the right type of resistor for the application, as using the wrong one can lead to electrical damage or render the system inoperable.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description