HVW3\416M50JLB

Series:	HVW
Packaging:	Bulk
Part Status:	Active
Resistance:	16.5 MOhms
Tolerance:	±5%
Power (Watts):	1.5W
Composition:	Carbon Film
Features:	High Voltage
Temperature Coefficient:	--
Operating Temperature:	--
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.155" Dia x 0.895" L (3.94mm x 22.73mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: HVW3\416M50JLB Application Field and Working Principle

Through hole resistors are electronic components that are used to limit or regulate the flow of electrical current in an electronic circuit. The most common form of through hole resistors are the leaded resistor, which use two metal leads, typically of a lead-tin or tin-copper alloy, that are pushed through a hole in the printed circuit board to create an electrical connection. The most common type of through hole resistors is the HVW3\416M50JLB. This type of resistor is often used in audio applications, such as guitar amps and other console equipment, due to its reliable and precise electrical characteristics.The HVW3\416M50JLB is a resistance element made from a semiconductor material, usually some type of silicon or germanium. This material is heated to a point where it is no longer able to conduct electricity, and as such, is used as a resistor. The HVW3\416M50JLB has two terminals, a source and a drain. Between these two terminals, there is a resistor element consisting of a thin layer of metal, which can be either a thin or thick film depending on the application. The HVW3\416M50JLB is a three-terminal device, which means that it can function in one of two modes: linear or switched. When operating in linear mode, the resistors are used to control the current flow through the resistor, while in switched mode the resistors are used to set the threshold at which the current is limited.The HVW3\416M50JLB is designed to be used in audio applications where precision and reliability is a priority. This type of resistor is very good at suppressing noise and maintaining a consistent signal to noise ratio. Additionally, the resistor also offers excellent high frequency stability and low noise levels, making it ideal for use in applications that require low-noise performance, such as audio and communication equipment.The HVW3\416M50JLB works by limiting the current flow in the same way that a normal variable resistor would. The resistor element inside the resistor is composed of a thin film of metal which, when placed across a supply voltage, varies its electrical resistance. By controlling the value of resistance, the current flow through the device is limited and regulated. This allows for precise control over electrical current in a circuit, making it ideal for use in delicate audio equipment.The working principle of the HVW3\416M50JLB is similar to that of traditional through-hole resistors. However, unlike these traditional resistors, the HVW3\416M50JLB can also be operated in the switched mode to provide even more precise control of current flow. This makes it ideal for use in applications where precise control over current is required, such as in audio equipment.Through-hole resistors, such as the HVW3\416M50JLB, are ideal for use in audio applications where reliability and precise control of current are both desired. With its reliable and precise electrical characteristics, this type of resistor can provide exceptional performance and stability in applications that demand it. With its high frequency stability and low noise levels, the HVW3\416M50JLB is an excellent choice for audio and communication equipment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description