HWZT-16.00MD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A resonator is an electronic device used to filter out all but a certain range of frequencies from a transmitted signal. It is a type of electronic filter that is most commonly used in electronic and radio frequency (RF) applications. The resonator is typically constructed from parallel or series-parallel combinations of copper or aluminum inductor coils and capacitors. When properly designed, it can be used to reduce the spectral width of transmitted signal, to enhance the signal-to-noise ratio and to separate the signal from any interfering signals.

The HWZT-16.00MD resonator is an electrostatically driven, tuned high-pass filter that is commonly used in areas such as radar, mobile communication and automotive electronics. It is capable of providing a high resolution filtering function with minimal distortion and small passband ripple. The HWZT-16.00MD resonator is designed to accept input signals of up to 16 MHz, with a passband of 3MHz, enabling it to offer very high attenuation of unwanted frequencies.

The working principle of the HWZT-16.00MD resonator is based on a tuned oscillator circuit. It consists of an inductor coil and a capacitor in parallel or series-parallel, which delivers an output voltage which is proportional to the input voltage at the resonant frequency. The resonator is capable of suppressing the frequencies below and above the resonant frequency due to the energy dissipation in the inductor and capacitor. The design of the resonator results in good frequency stability and high attenuation.

The HWZT-16.00MD resonator is suitable for a wide range of applications such as radiofrequency (RF) signal processing, interference mitigation and control in automotive electronics and other mobile communication systems. For example, in the automotive industry, the HWZT-16.00MD resonator can be used in radio noise suppression, radio signal boosting and signal filtering. In mobile communication systems, the HWZT-16.00MD resonator can be used to reduce interference caused by the spread spectrum signal and provide signal isolation.

In addition, the HWZT-16.00MD resonator can also be used for signal shifting, signal modulation and signal restoration in information processing and water-level control systems. It is suitable for various noise suppression and signal re-construction applications as it has high signal gain and transmission efficiency. Moreover, the HWZT-16.00MD resonator can also be used to reduce the noise caused by interference from other electronic components.

To conclude, the HWZT-16.00MD resonator is a highly efficient device designed for a wide range of applications which require precision filtering and signal control. It is capable of providing high attenuation of unwanted frequencies and offers excellent frequency stability, along with a low-level distortion and passband ripple. Therefore, it is suitable for use in automotive electronics, mobile communication and radiofrequency (RF) signal processing systems.

The specific data is subject to PDF, and the above content is for reference