HZ0805G471R-10 Filters

Ferrite beads and chips are important components of electronic equipment. The HZ0805G471R-10 application field and working principle is an example of how ferrite beads and chips are used in modern electronic circuits.The HZ0805G471R-10 is a chip-style, heavy-current ferrite bead. It is designed for use in applications where high current noise suppression is required. The bead has a rated current of up to 2A, so it is suitable for use in a variety of medium- to high-power applications. It also has a very low inductance, offering good performance in frequency ranges up to at least 5GHz. The main application field of the HZ0805G471R-10 is in power line correction. The bead is designed to be used in a series configuration, with the power line running through the center of it. The noise generated by the power line is then attenuated as it passes through the bead, resulting in improved power line performance. This makes the HZ0805G471R-10 an ideal choice for use in power supplies, motor drivers, and other high-power applications.The working principle of the HZ0805G471R-10 is that of a low-pass filter. As current or signal passes through the bead, the ferrite material inside acts as an impedance, opposing the current. This creates an opposing magnetic field which in turn produces inductance that filters out high frequencies. As a result, the frequencies above the bead’s cut-off frequency are attenuated, while the frequencies below the cut-off frequency are allowed to pass through unaffected. In this way, the bead effectively suppresses high frequency noise while allowing the lower frequency signals to pass through unimpeded.The HZ0805G471R-10 can also be used for common-mode noise suppression. Here, two HZ0805G471R-10 beads are placed on either side of a power line, with the power line running through the center of both beads. The noise is then suppressed in a similar manner as in the series configuration, but in this case the two beads interact to further reduce the noise.In addition to power line correction and common-mode noise suppression, the HZ0805G471R-10 can also be used in RF noise suppression applications. Here, the bead is used to filter out high frequency noise generated by RF signals. This is done by positioning the bead in close proximity to the antenna, so that the signal passes through the bead and is attenuated before it reaches the antenna. This ensures that only the low frequency signals are received, resulting in improved reception and reduced interference.Overall, the HZ0805G471R-10 is an important part of modern electronic designs. Its ability to attenuate high frequency noise while allowing the lower-frequency signals to pass through uninhibited makes it an ideal choice for power line correction, common mode noise suppression, and RF noise suppression applications. By using the HZ0805G471R-10, engineers can ensure that their designs operate efficiently and effectively, providing improved performance and greater reliability.

HZ0805B272R-10	Laird-Signal...	0.05 $	82000	FERRITE BEAD 2.7 KOHM 080...
HZ0805C202R-10	Laird-Signal...	0.01 $	56000	FERRITE BEAD 2 KOHM 0805 ...
HZ0805D102R-10	Laird-Signal...	0.03 $	188000	FERRITE BEAD 1 KOHM 0805 ...
HZ0805G471R-10	Laird-Signal...	0.03 $	80000	FERRITE BEAD 470 OHM 0805...
HZ0805D152R-10	Laird-Signal...	0.04 $	128000	FERRITE BEAD 1.5 KOHM 080...
HZ0805B222R-10	Laird-Signal...	0.04 $	108000	FERRITE BEAD 2.2 KOHM 080...
HZ0805E601R-10	Laird-Signal...	0.03 $	261	FERRITE BEAD 600 OHM 0805...
HZ0805C202R-00	Laird-Signal...	0.0 $	1000	FERRITE BEAD 2 KOHM 0805 ...
HZ0805D102R-00	Laird-Signal...	0.0 $	1000	FERRITE BEAD 1 KOHM 0805 ...
HZ0805D152R-00	Laird-Signal...	0.0 $	1000	FERRITE BEAD 1.5 KOHM 080...
HZ0805G471R-00	Laird-Signal...	0.0 $	1000	FERRITE BEAD 470 OHM 0805...
HZ0805B252R-10	Laird-Signal...	0.05 $	1000	FERRITE BEAD 2.5 KOHM 080...
HZ0805E601R-00	Laird-Signal...	0.0 $	1000	FERRITE BEAD 600 OHM 0805...