| Allicdata Part #: | I12-SA205-ND |
| Manufacturer Part#: |
I12-SA205 |
| Price: | $ 52.39 |
| Product Category: | Switches |
| Manufacturer: | SICK, Inc. |
| Short Description: | SWITCH SAFETY 2NC |
| More Detail: | N/A |
| DataSheet: |  I12-SA205 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | $ 47.62800 |
| Ingress Protection: | IP67 - Dust Tight, Waterproof |
| Mechanical Life: | 1,000,000 Cycles |
| Electrical Life: | -- |
| Operating Position: | -- |
| Operating Temperature: | -20°C ~ 80°C |
| Overtravel: | -- |
| Differential Travel: | -- |
| Pretravel: | -- |
| Release Force: | -- |
| Operating Force: | 612gf |
| Features: | -- |
| Series: | i12S |
| Termination Style: | Connector |
| Mounting Type: | Chassis Mount |
| Actuator Type: | Panel Disconnect |
| Voltage Rating - DC: | 24V |
| Current Rating: | 2A (DC) |
| Switch Function: | On-Off |
| Circuit: | DPST-NC |
| Part Status: | Active |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Snap Action, Limit Switches are widely used in many industrial applications to detect mechanical position, and the I12-SA205 is an excellent example of this. This model of switch is specifically designed to detect changes in the rotational speed of electromechanical equipment. It does this by using two contactor blocks, which when activated will move either up or down depending on the direction of travel. This allows the switch to accurately detect the speed at which a moving part is traveling.
The I12-SA205 can be used in a variety of scenarios, some of which are listed below:
- It can be used to detect the position of a motor, and when it reaches a certain point in its rotation.
- It can be used to detect when a machine has reached a predetermined position.
- It can be used to detect the speed of an object.
- It can be used to detect when a system has an unexpected movement.
The working principle of the I12-SA205 is relatively straightforward, and involves the use of two contactor blocks. The first contactor block is located at the end of a drive shaft, and is connected to a circuit by a wire. When the shaft rotates, the contactor blocks move either up or down depending on the direction of the rotation. If the contactor blocks move in the same direction, then the switch is active and will cause a signal to be sent to the circuit. If the contactor blocks move in opposite directions, then the switch is not active and will not cause any signal to be sent.
The I12-SA205 is capable of accurately detecting mechanical position and its speed by accurately measuring the movement of two contactor blocks. This is a major advantage over other types of switches, as the position and speed of both parts need to be closely monitored. Additionally, the I12-SA205 can be used in a variety of different scenarios, making it a versatile switch that is suitable for many applications.
The specific data is subject to PDF, and the above content is for reference
LIMIT SWITCH
LIMIT SWITCH ROLLER LEVER LED
SWITCH SNAP ACTION
SWITCH SNAP ACTION
SEALED AERO SWITCH
SWITCH SNAP ACT SPST-NO 16A 125V