IAG11-1REC4-52-15.0-A-21

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are distinct in that they contain and quickly interrupt low current and short circuit current events. The IAG 11-1REC4-52-15.0-A-21 is a circuit breaker that is used to disconnect load from the electrical power supply to protect against damage from excess electrical current. This type of circuit breaker is compatible with any type of electrical system, including residential, commercial and industrial applications.

The IAG 11-1REC4-52-15.0-A-21 features low voltage protection and thermal overload protection. Its low voltage protection system is triggered when the voltage drops below 85V, and the thermal overload protection ensures that the breaker is shut off immediately if the current exceeds the rated amp limit. This eliminates the need for manual operation, as the breaker will turn off automatically when needed.

The IAG 11-1REC4-52-15.0-A-21 is equipped with a reset button, which must be used to manually reset the device after a circuit has been tripped. This reset button can be used to reactivate the circuit breaker if it has been tripped due to an overcurrent event. The breaker can also be disconnected at the source of the power supply, allowing for safe and easy repairs or maintenance without the risk of the breaker being activated again.

The working principle of the IAG 11-1REC4-52-15.0-A-21 is based on the principle of arcing contacts. When a short circuit occurs, the contacts will arc and separate. This causes the breaker to trip and shut off the power supply, stopping any further damage from occurring. Once the power is shut off, the circuit breaker must be reset manually.

The IAG 11-1REC4-52-15.0-A-21 circuit breaker is widely used in various commercial, industrial, residential, and automotive electronics applications. It is suitable for DC (direct current) applications of up to 15.0 amps, with a maximum rated voltage of up to 600 VDC. The breaker is approved by UL, CSA, and IEC standards, and is available in a range of sizes and amp ratings, depending on the specific application.

In conclusion, the IAG 11-1REC4-52-15.0-A-21 is a high quality, reliable circuit breaker used to disconnect electrical loads from power sources in order to prevent overcurrent damage. It features reliable low voltage and thermal overload protection, and is compatible with a wide range of DC voltage and amperage requirements. The breaker is UL and CSA approved, and is easy to operate and reset manually.

The specific data is subject to PDF, and the above content is for reference