IAGN6-1-69-1.00 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices that protect the electrical power system from receiving too much current or from short circuits. When there is an overload or short circuit, the circuit breaker opens and isolates the faulty circuit from the rest of the power system.

The IAGN6-1-69-1.00 is a circuit breaker that is designed for use in low-voltage applications, and is able to protect circuits including those in the domestic and light commercial arenas. It features a single-phase design with a rated voltage of up to 250V AC, and can be triggered when an overcurrent of up to 30A is detected. Its operating temperature range is up to 10°C to 55°C.

The IAGN6-1-69-1.00 is a moulded case circuit breaker (MCCB) with an instantaneous trigger mechanism. It is designed to prevent damage to an electrical system due to an overcurrent situation and can be manually reset once the fault has been cleared. The MCCB operates by using an electromechanical mechanism to open the circuit when an overload is sensed on the line.

The IAGN6-1-69-1.00 is equipped with two adjustable overload settings. The first setting is used to protect against overcurrent in normal operation, while the second setting is used to protect against overloads during starting of motors or other devices which may cause a higher inrush current. The MCCB is triggered when the sensing element detects current beyond the overload settings. The sensing element is typically a bimetallic strip that heats up and causes the contacts to open when a high current is detected. The MCCB will then remain open until the fault is cleared and the reset button on the device is pushed.

The IAGN6-1-69-1.00 is designed for both indoor and outdoor use, and is constructed with a robust design and components that make it suitable for use in harsh environments. It features a high breaking capacity and is able to safely and reliably protect circuits up to 30A against overloads and short circuits. The MCCB is also equipped with a warning indicator and a trip delay which allows for a few seconds delay before the circuit breaker trips, thus allowing for a controlled shutdown of the system.

In conclusion, the IAGN6-1-69-1.00 is a reliable and safe circuit breaker suitable for use in low voltage applications. It features an electromechanical mechanism with adjustable overload settings, a warning indicator and a trip delay. It is designed to protect circuits from overloads and short circuits, and is able to provide reliable and safe protection of circuits up to 30A.

The specific data is subject to PDF, and the above content is for reference