ICH7548S05

Current - Output (Max):	15A
Control Features:	Enable, Active High
Size / Dimension:	2.40" L x 2.28" W x 0.50" H (61.0mm x 57.9mm x 12.7mm)
Package / Case:	9-DIP Module
Mounting Type:	Through Hole
Efficiency:	83%
Operating Temperature:	-40°C ~ 100°C
Features:	Remote On/Off, OVP, SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1.5kV
Power (Watts):	75W
Series:	ICH
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	5V
Voltage - Input (Max):	75V
Voltage - Input (Min):	36V
Number of Outputs:	1
Type:	Isolated Module
Part Status:	Active
Packaging:	Box

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC converters are specialized components that convert a Direct Current (DC) input power into a DC output voltage. The ICH7548S05 is a switch-mode DC/DC converter that offers integrated current-mode control with a high accuracy current monitor. It is specifically designed to provide a regulated output voltage from a wide range of input voltages without the need for an external reference.This device offers a wide input voltage range from 5.5 V to 16 V, adjustable output voltage range from 1.2 V to 7 V, and output current up to 2 A with a 100% duty cycle operation. Its high power conversion efficiency and low quiescent current make it ideal for use in portable and battery-powered applications. The ICH7548S05 features bi-directional logic inputs, a soft-start time configuration, and an adjustable current limit. Its wide operating temperature range (from -40°C to 125°C) also makes it suitable for use in demanding industrial applications.The ICH7548S05 utilizes a buck topology to convert the input supply to a regulated output voltage. It has an integrated synchronous MOSFET switch and current-mode control with a high accuracy current monitor. During operation, the device continuously checks the voltage across the external current sense resistor (SHUNT) and adjusts the duty cycle of the internal switch to the proper ratio. This results in a regulated output voltage being supplied to the load.The device also features an enable pin (EN) that can be used to enable/disable the step-down converter. When enabled, the converter will be in normal operation mode, whereas when disabled, the converter will immediately enter low power standby mode. In addition, there is a "power-good" signaling circuit which monitors the output voltage and indicates when it is in the programmed range.The ICH7548S05 is an ideal solution for use in portable and battery-powered applications. Thanks to its high power conversion efficiency and adjustable current limit, it is suitable for use in a wide range of DC/DC conversion applications. Its wide operating temperature range and integrated power-good output signal make it well-suited for use in industrial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description