Allicdata Part #: | ICPL2601-ND |
Manufacturer Part#: |
ICPL2601 |
Price: | $ 0.00 |
Product Category: | Isolators |
Manufacturer: | Isocom Components 2004 LTD |
Short Description: | OPTOISOLATOR 2.5KV OPN COLL 8DIP |
More Detail: | Logic Output Optoisolator 10Mbps Open Collector, S... |
DataSheet: | ICPL2601 Datasheet/PDF |
Quantity: | 2327 |
Data Rate: | 10Mbps |
Supplier Device Package: | 8-DIP |
Package / Case: | 8-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | 0°C ~ 70°C |
Voltage - Supply: | 7V |
Current - DC Forward (If) (Max): | 20mA |
Voltage - Forward (Vf) (Typ): | 1.55V |
Rise / Fall Time (Typ): | -- |
Propagation Delay tpLH / tpHL (Max): | 75ns, 75ns |
Series: | -- |
Current - Output / Channel: | 25mA |
Output Type: | Open Collector, Schottky Clamped |
Input Type: | DC |
Common Mode Transient Immunity (Min): | 1kV/µs |
Voltage - Isolation: | 2500Vrms |
Inputs - Side 1/Side 2: | 1/0 |
Number of Channels: | 1 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
ICPL2601 is an optoisolator, also known as a photocoupler, a logic output type that uses infra-red light for optical coupling. It combines a high-speed infrared light-emitting diode (LED) and a phototransistor into an integrated circuit package. The optoisolator isolates electrical power and signals against high voltages, noise, and ground-loop interference while maintaining data integrity in applications such as line receivers, modems, and power line communication devices.
The ICPL2601 optoisolator features a high-speed signal transmission rate of 90 Mbps and provides a logic output interface that meets the requirements of rapid signal switching. It utilizes an infrared LED as the light source and employs a built-in phototransistor for signal direction control and data transfer. The optoisolator is easy to test and implement and offers a wide range of features and benefits for many different applications.
The optoisolator can be used to isolate a variety of signals and reduce the possibility of electromagnetic interference (EMI). It has an excellent switching speed and can support a wide frequency range from 10 kHz to 1 GHz. The optoisolator also offers a wide operating temperature range (-40°C to +85°C) and is designed to work in a wide range of environmental conditions. It is highly scalable and can be used as a stand-alone isolation device or as part of an embedded system.
The working principle of an optoisolator is based on the basic electrical procedures. When an LED is lit, it emits light that is then received by the photosensitive transistor. This produces a voltage that is transferred to the output signal on the other side of the isolation layer. Because the LED uses a different voltage than the photosensitive transistor, this ensures that any interference between the input and output cannot take place. The optoisolator therefore provides a secure channel of communication between two separate electrical systems.
The ICPL2601 optoisolator can be used for a variety of applications, including data transfer, line receivers, modems, and power line communication devices. The device has a reliable data transmission rate and can be used to increase the speed and reliability of communication. In addition, it can also provide protection against high voltages, noise, and ground-loop interference while maintaining data integrity. This makes the ICPL2601 an ideal solution for many different applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ICPLW50LSMT&R | Isocom Compo... | 0.37 $ | 1000 | OPTOISO 5KV 2 CH TRANS S0... |
ICPL4503 | Isocom Compo... | 1.18 $ | 325 | OPTOISO 5KV TRANSISTOROpt... |
ICPL0452SMT&R | Isocom Compo... | 0.41 $ | 1000 | OPTOISO 3.75KV TRANSISTOR... |
ICPL0500SMT&R | Isocom Compo... | 0.0 $ | 1000 | OPTOISO 3.75KV TRANS W/BA... |
ICPL0501SMT&R | Isocom Compo... | -- | 2000 | OPTOISO 3.75KV TRANS W/BA... |
ICPL4502 | Isocom Compo... | 1.18 $ | 1891 | OPTOISO 5KV TRANSISTOROpt... |
ICPL2530 | Isocom Compo... | -- | 1468 | OPTOISO 5KV 2CH TRANSISTO... |
ICPL2531 | Isocom Compo... | 1.58 $ | 1462 | OPTOISO 5KV 2CH TRANSISTO... |
ICPL2630 | Isocom Compo... | 1.58 $ | 1335 | OPTOISO 5KV 2CH TRANSISTO... |
ICPL0453SMT&R | Isocom Compo... | 0.41 $ | 1000 | OPTOISO 3.75KV TRANSISTOR... |
ICPL2601 | Isocom Compo... | -- | 2327 | OPTOISOLATOR 2.5KV OPN CO... |
ICPL2601SMT&R | Isocom Compo... | 0.41 $ | 1000 | OPTOISOLATOR 2.5KV OPN CO... |
ICPL3120 | Isocom Compo... | 1.46 $ | 262 | OPTOISO 5KV 1CH GATE DRIV... |
ICPL0601SMT&R | Isocom Compo... | 0.43 $ | 1000 | OPTOISO 3.75KV OPN COLLEC... |
ICPL2631 | Isocom Compo... | 1.58 $ | 1012 | OPTOISO 5KV 2CH TRANSISTO... |
OPTOISO 5.3KV TRI-STATE 8SMDLogic Output...
OPTOISO 5KV PUSH PULL 6SSOLogic Output O...
OPTOISO 2.5KV OPEN COLL 8SSOPLogic Outpu...
OPTOISO 1.5KV OPN COLLECTOR 8DIPLogic Ou...
OPTOISO 3.75KV PUSH PULL 8DIP GWLogic Ou...
OPTOISO 7.5KV OPEN COLL 10DIPLogic Outpu...