IDCP3916ER680M

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors, or choke coils, are components with limited inductance values manufactured specifically for specific intended applications. The IDCP3916ER680M is a type of fixed inductor that is generally used in DC to DC converters and AC to DC converters as input and output filters and capable of operating up to a temperature range of -40°C to +125°C. This component is suitable for various applications, including computer motherboards, projectors, and other digital electronic products.

This component consists of an insulated coil wound around a ferrite core. The fixed iron core provides a higher permeability than a bobbin wound core, which allows the coil to be difficult to saturate and generate a higher inductance. The IDCP3916ER680M fixed inductors are polarized, with the positive wire indicated by the "plus" symbol printed on the top of the component.

The main advantage of using this particular type of fixed inductor is that it is able to store energy over time. Additionally, it filters high frequency signals and prevents any excessive currents from flowing into the circuit. Because it has a limited inductance value, the power loss in the iron core is reduced.

The basic working principle behind the IDCP3916ER680M fixed inductor follows the same principles as most electrical components. When electric current passes through the coils of the inductor, a magnetic field is created that stores energy. When the current starts to flow in the opposite direction, the magnetic field collapses and releases the energy again. As the energy is released back into the circuit, a voltage is created that works against the initial voltage, thus reducing the current that flows through the circuit.

The IDCP3916ER680M fixed inductor has a wide range of applications in both AC and DC circuits. In AC circuits, it is typically used as a low-pass filter to prevent high-frequency surges from passing through, while in DC circuits, it is used as an output filter to reduce output ripple. In addition, this component is often used to smooth out DC signals in order to maintain a steady output, or as a part of a voltage regulator circuit to stabilize the output voltage of a device.

In summary, the IDCP3916ER680M is a type of fixed inductor that is most commonly used in DC to DC converters and AC to DC converters. It is made up of an insulated coil wound around a ferrite core that is able to store energy over time and filter high frequency signals. Its main purpose is to reduce output ripple, stabilize the output voltage of a device, and provide protection against excessive currents.

The specific data is subject to PDF, and the above content is for reference