IEG1-1REC4-63-15.0-01-V

Circuit Breakers

The IEG1-1REC4-63-15.0-01-V is a circuit breaker that is used to protect electrical circuits within electrical systems. Circuit breakers are safety devices that break the circuit in the event of an overload or short circuit. This is done to prevent damage to the electrical components and wiring of the system.

The IEG1-1REC4-63-15.0-01-V circuit breaker is a medium voltage device that is usually employed in larger electrical systems. It is rated to trip at 15A and has a voltage rating of 5kV. This circuit breaker has a manual reset, so it must be manually reset after every trip. The manual reset is also a safety feature, as it prevents the breaker from automatically resetting without a visual inspection.

The IEG1-1REC4-63-15.0-01-V circuit breaker is a two-pole device. This means it has two separate contacts that can be opened or closed. When the breaker trips, the contacts open and break the circuit. This stops the current from flowing, thus preventing damage to the system’s components. The manual reset feature ensures that the breaker can be reset only after it has been inspected, to ensure that it is safe to reset the breaker.

The IEG1-1REC4-63-15.0-01-V circuit breaker is typically used in high voltage systems, where the circuit load may require the breaker to trip more frequently. These breakers usually have a higher interrupting rating, which means they can withstand higher voltage and amperage before tripping. This is important for larger systems, where high loads may cause the breaker to trip more often.

The IEG1-1REC4-63-15.0-01-V circuit breaker also has an integral temperature and pressure sensor. This sensor is used to detect any abnormal temperature readings that could indicate an overload and trigger the breaker to trip. This helps protect the system by avoiding further damage caused by an overloaded circuit.

The IEG1-1REC4-63-15.0-01-V circuit breaker is a reliable, reliable and effective way to protect high voltage systems. It is a medium voltage device that is designed to protect systems from both overloads and short circuits. The manual reset feature is a great safety feature as it prevents the breaker from automatically resetting without a visual inspection.