IEG1-36548-3-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The IEG1-36548-3-V is a Circuit Breaker, and is used to protect against short-circuiting and overloading of electrical circuits. It is a low voltage device, designed to be installed in domestic, commercial and industrial buildings, either as a permanent fixture or as a portable device. IEG1-36548-3-V trips the circuit breaker when an overload current or short-circuit current is detected.

The IEG1-36548-3-V uses a combination of mechanical and electrical components to detect overload and short-circuit conditions. The main components include a trip unit, an auxiliary contact, a definite time delay, an operating coil and a shunt-trip device.

The trip unit protects the circuit from short-circuits and overload currents. When a short-circuit current or an overload current is detected, the trip unit trips the circuit breaker and thus disconnects the circuit from the power source.

The auxiliary contact is used to control the energizing of the definite time delay. It is connected in series with the operating coil. When the system detects an over-current or short-circuit condition, the auxiliary contact closes and activates the definite time delay. After the time delay has elapsed, the operating coil is energized, thus activating the circuit breaker mechanism.

The definite time delay allows the operator to reset the circuit breaker if the fault is cleared before the time delay has elapsed. The time delay also protects against prolonged or repetitive faults.

The shunt-trip device is used to remotely trip the circuit breaker, if the operator needs to disconnect the circuit in an emergency. A shunt trip signal is usually sent from a control panel, which trips the circuit breaker when activated.

The IEG1-36548-3-V is a robust, reliable and cost-effective device that is suitable for both commercial and industrial applications. It is easy to install and maintain, and provides good system protection against over-current and short-circuit conditions.

The specific data is subject to PDF, and the above content is for reference