IEG11-1-63F-10.0-01-V Datasheet/PDFThe IEG11-1-63F-10.0-01-V circuit breaker is a type of industrial electrical protection device designed to protect circuits from damage caused by overloads or short circuits. It is used to isolate circuits when there is a fault present in the system. The breaker consists of two parts, the primary contacts and the main contacts. The primary contacts are used to open and close the circuit, while the main contacts act as a safety device when the primary contacts fail.
The IEG11-1-63F-10.0-01-V circuit breaker is designed for use in industrial applications, such as control panels, motor control centers, and power distribution centers. It is also used in residential, commercial, and industrial applications to protect electrical circuits from damage due to overloads, short circuits, and other overcurrents. The breaker can be used to break both AC (alternating current) and DC (direct current) circuits. The IEG11-1-63F-10.0-01-V circuit breaker is rated for current up to 100 amperes and voltage up to 600 volts. The breaker is trip free, meaning that it is designed to trip even if an instaneous overload occurs without the risk of irreparable damage.
In order to function correctly, the IEG11-1-63F-10.0-01-V circuit breaker requires the use of an overcurrent protective relay. The relay monitors the current flow in the circuit and once it exceeds the breaker\'s current rating, the relay will cause the main contacts of the breaker to open, cutting off the current flow. This will then cause the circuit breaker to trip, thus preventing damage to the circuit due to the overload or short circuit. The overcurrent relay is normally placed between the power source and the breaker, and is typically wired separately from the breaker.
The IEG11-1-63F-10.0-01-V circuit breaker is a reliable and economical circuit protection device. It is easy to install and maintain, and its rugged construction makes it suitable for use in industrial applications. It is also UL listed and CSA certified, providing added assurance that it meets the safety requirements of these organizations. The breaker is ideal for protecting circuits from damage caused by overloads or short circuits, and is an essential part of any well-equipped industrial electrical system.