IEG6-1-51-30.0-01-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are designed for the protection of equipment, circuits, or systems from overload or short-circuiting. IEG6-1-51-30.0-01-V is a type of circuit breaker in which an electromagnet and a set of accumulators work together to open and close the contacts of a circuit.

IEG6-1-51-30.0-01-V circuit breaker is mainly used in low-voltage power distribution system, such as residential, commercial, and industrial buildings, where it can prevent sudden surges of large currents, overload and short-circuit of the electrical circuit. In addition, the circuit breaker is also used in renewable energy power generation systems, such as solar energy, and wind energy, etc.

The working principle of the IEG6-1-51-30.0-01-V circuit breaker is based upon the interaction of an electromagnet and a set of accumulators. When there is a demand for current, an electromagnet is energized with a set of accumulators and the armature of the electromagnet is in the closed position. The electromagnet is held in this position until it is exposed to an excessive current, at which point the set of accumulators will open the armature of the electromagnet, breaking the circuit path and prohibiting the flow of current.

Once the circuit breaker is tripped, the accumulators will hold the armature of the electromagnet open, thus blocking further current. The power supply to the circuit is interrupted until the armature of the electromagnet can be reset manually, which is typically done by pressing a reset button.

Once the current is reset, the electromagnet will be re-energized and the armature will be reset to the closed position, thus allowing current to flow again. This reset action can be manual or automatic, depending on the design of the circuit breaker.

In addition to overcurrent protection, the IEG6-1-51-30.0-01-V circuit breaker also provides protection against arc-flash and short-circuiting. When an arcing fault is detected, the accumulators will open the armature of the electromagnet, which will quickly extinguish the arc flash. In short-circuits, the electromagnet and accumulators will also open the armature and block the flow of current.

The IEG6-1-51-30.0-01-V circuit breaker is a reliable, safe and cost effective solution for short-circuiting, arc-flash and overcurrent protection. It is a great choice for both industrial and commercial applications, as it is easy to install, maintain and use.

The specific data is subject to PDF, and the above content is for reference