IELK1-1-52F-10.0-A-01-V

Series:	IEL
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	10A
Number of Poles:	1
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IELK1-1-52F-10.0-A-01-V Application Field and Working Principle

Circuit breakers are vital components used in electrical control panels, motor starters and motors. Circuit breakers serve an important purpose in that they protect against excessive current flow, which can cause arcing or firing of the motor. The specific IELK1-1-52F-10.0-A-01-V breaker has been designed as a low voltage, 10 Amp motor circuit protector suitable for all types of motors up to 10 horsepower. The key application field for which the IELK1-1-52F-10.0-A-01-V breaker is designed is to provide motor overload protection for motors with a single phase current draw up to 10 Amps.The IELK1-1-52F-10.0-A-01-V breaker works by monitoring the electrical current that passes through the switch. When the amount of current passing through the breaker exceeds a certain level (which is set in advance by the manufacturer), the switch trips and opens the circuit, effectively cutting off the electricity supply and preventing further current generation due to a malfunctioning motor or component.The working principle of the IELK1-1-52F-10.0-A-01-V breaker is based on a combination of current sensing and temperature monitoring. The breaker incorporates two thermal sensing elements (one near the circuit breaker, and one on the motor). These two sensors measure both the current flow in the circuit and the temperature of the motor. When the current reaches a certain level and the motor temperature rises above a pre-defined limit, the breaker trips and shuts off the power.Apart from its use as a motor overload protection device, the IELK1-1-52F-10.0-A-01-V circuit breaker can also be used to protect against short circuits, which can occur due to loose wires and components. The breaker detects a short circuit in the same manner as it does when detecting a motor overload, by monitoring the temperature and voltage of the circuit and tripping the circuit when the pre-defined limits are exceeded.The IELK1-1-52F-10.0-A-01- V circuit breaker also features a manual reset feature, which is important for resetting the switch after it has tripped. To reset the breaker, the user simply presses the reset button located near the breaker and the switch will reset itself. This makes it easier to reset the switch manually in cases where a thermal sensor could not be used to reset the circuit due to a temperature issue.Overall, the IELK1-1-52F-10.0-A-01-V circuit breaker is designed to provide motor overload protection in electrical control panels and motor starters, with a maximum current draw rating of 10 Amps. The breaker’s combination of current sensing and temperature monitoring and its manual reset feature make it an essential component for providing motor and component protection.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description