IELK1111-1-63-40.0-01-V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers, typically housed in a metal panel with a switch handle, are typically used to protect electrical circuits in the event of an overload. The IELK1111-1-63-40.0-01-V is an example of a circuit breaker that can be used in a wide range of applications. 

The IELK1111-1-63-40.0-01-V is a three-pole circuit breaker that can be wired for either single-phase or three-phase operation. It is rated for a maximum current of 63A and a maximum voltage of 40V. It is also designed for use in direct current (DC) circuits or alternating current (AC) circuits. Depending on the application, it can be used as an independent breaker or connected to other compatible circuit breakers to form a multi-pole system.

The circuit breaker consists of three main components: the trip unit (or breaker switch), the trip coil, and the release contacts. The trip unit is the switch that is operated from the outside of the panel to turn the circuit breaker off in the event of an overload. The trip coil is the electrical component that carries signals from the trip unit to the release contacts. The release contacts are the electrical outlets that break the circuit in the event of an overload.

The IELK1111-1-63-40.0-01-V can be used in residential, commercial, and industrial settings. It is designed to be used with a variety of circuit protection devices, such as overvoltage protection relays, current limiting fuses, and surge protectors. In residential applications, it can be used to protect circuits from overloads due to faulty appliances, or from surges due to lightning strikes. In industrial settings, it can be used as a safety measure to protect equipment from overloads. In commercial settings, it can be used to protect circuit breakers from overcurrents due to overloading.

When an overload or surge occurs, the trip coil inside the breaker will detect the overload and send a signal to the trip unit, causing it to switch the circuit breaker off. This will prevent the current from flowing, thus protecting the circuit.  When the cause of the overload has been removed, the releasing manganese contacts will switch the circuit breaker back on when the overload is cleared. This will restore power to the circuit.

The specific data is subject to PDF, and the above content is for reference