IFSC1008ABER220M01

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors consist of a wind of wire around a magnetic core material which is designed for efficient inductor construction and operation. The IFSC1008ABER220M01 is an example of the various inductors of this type. It is designed to operate at high voltage and low current levels, and has a wide range of applications.

The IFSC1008ABER220M01 is a fixed inductor designed to provide high-frequency AC stability. The core of the device is made of high-quality ferrite material, with a copper wire windings and through-hole termination. The device has a DC resistance of 220 mΩ and its rated current is 1.1A. It has a common-mode inductance of 10 μH, and a leakage inductance of 0.73 μH. It is also designed to be able to tolerate up to 30V AC with no reverse polarity.

The major application of the IFSC1008ABER220M01 is in inverters, chargers, and motor control units. It is particularly well-suited for power factor correction of AC/DC power supplies. In these applications, the device acts as a filter, eliminating harmonics and providing a stable current flow in the circuit. It also performs as a low-pass filter at higher frequencies, effectively suppressing interference from external sources. In DC/DC converters, the inductor is used to reduce voltage spikes and improve the overall conversion efficiency.

The working principle of the IFSC1008ABER220M01 is based on the Faraday\'s law of induction. When a current passes through the device, a magnetic field is created that induces a current in the adjacent coil of wire. This creates a feedback effect, resulting in self-inductance, which causes the current to increase as the frequency of the applied voltage is increased. The inductance of the device is affected by the number of turns in the wire coil, as well as the magnetic characteristics of the core material. The inductor also has a parasitic capacitance, which increases its inductance at higher frequencies.

In addition, the IFSC1008ABER220M01 is able to replace large metal-core inductors in circuits where size is critical. This is because it has a small profile, as well as low DCR and self-capacitance, making it suitable for use in low-noise applications. It is also highly reliable, since it is designed for repetitive operation with minimal power loss.

The IFSC1008ABER220M01 is an ideal choice for various power conversion and filtering applications. Its high-frequency AC stability, low DCR, low parasitic capacitance, and wide operating voltage range make it suitable for a variety of applications. Its simple construction and reliable operation make it an efficient and cost-effective solution for controlling AC power supplies and DC/DC converters.

The specific data is subject to PDF, and the above content is for reference