IHLP2525BDERR47M01 Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors make up an indispensible part of circuits utilizing alternating current, supplying stabilizing and filtering properties to create the desired effect. Thus, it is important to use the most optimal fixed inductor available. The IHLP2525BDERR47M01 is a type of surface-mount fixed inductor that is part of the IHLP-2525B series. It is constructed of ferrite and is particularly efficient due to the low DC resistance, high inductance, and its ability to handle high currents with relatively low power losses.

This type of inductor features uses a surface-mount construction with a ferrite core material and a standard 3mm x 3mm x 4.3mm size. It has an extremely low DC resistance of 0.020 ohms and a high inductance rating of 4.7uH, allowing it to be used in a wide variety of applications. Its rated current of 2.0A can handle even higher peak currents of up to 6.9A without suffering from excessive power losses. In addition, its rated temperature range is -40 to +85°C.

Due to its low DC resistance, high inductance rating, and its ability to handle high currents without excessive power losses, the IHLP2525BDERR47M01 is ideal for use in the automotive industry. With its standard 3mm x 3mm x 4.3mm size, it is highly compatible with a variety of different circuits, and can be used in applications ranging from onboard electronics to lighting systems. It is also suitable for use in other industries, such as consumer electronics and medical device applications.

The working principle of fixed inductors is based on the behavior of alternating current. As alternating current moves through a coil of wire, a magnetic field is created which induces a voltage in the coil. This voltage is known as the self-inductance voltage, and is proportional to the rate of change of the current. Fixed inductors are used to limit the current in a circuit, and therefore stabilize it. This is achieved by utilizing the current’s own magnetic field to oppose any change in the rate of the current.

The IHLP2525BDERR47M01 is well-suited for applications that require high-current and high-efficiency. It features a standard 3mm x 3mm x 4.3mm size, and has a low 0.020 ohm DC resistance. Its high inductance rating of 4.7uH, allows it to be used in a variety of applications, from automotive to consumer electronics. Its high current rating of 2.0A, allows it to handle peak currents of up to 6.9A without significant power loss. With its reliability and efficiency, it is an ideal choice for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference