IHLP2525CZER1R5M01 Inductors, Coils, Chokes

DC Resistance (DCR):	15 mOhm Max
Height - Seated (Max):	0.118" (3.00mm)
Size / Dimension:	0.270" L x 0.255" W (6.86mm x 6.47mm)
Supplier Device Package:	--
Package / Case:	Nonstandard
Mounting Type:	Surface Mount
Inductance Frequency - Test:	100kHz
Operating Temperature:	-55°C ~ 125°C
Ratings:	--
Frequency - Self Resonant:	--
Q @ Freq:	--
Series:	IHLP-2525CZ-01
Shielding:	Shielded
Current - Saturation:	18A
Current Rating:	9A
Tolerance:	±20%
Inductance:	1.5µH
Material - Core:	--
Type:	Molded
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IHLP2525CZER1R5M01 Application Field and Working Principle

Fixed inductors play a critical role in the design of various electronic circuits. One such inductor is the IHLP2525CZER1R5M01, a low profile and high current surface mount inductor. This particular inductor is used in a wide variety of applications, including power supplies, DC-DC converters, switching regulators, and PFC circuits. In this article, we discuss the IHLP2525CZER1R5M01\'s application field and working principle. The IHLP2525CZER1R5M01 is constructed with two parts: the core and the coil. The coil is wound around a ferrite core, which consists of iron, nickel, and zinc oxides. This core material has a high saturation flux density at relatively low costs. The coil is made of copper wire which is insulated with enamel or nylon. The IHLP2525CZER1R5M01 can support up to 3.5 amperes of continuous current and has an inductance value of 6.8uH. The inductance value will remain relatively consistent over a wide range of temperatures, which makes it ideal for high power applications in extreme temperatures. The fact that the inductor is a surface mount device also makes it very easy to implement in any circuit design. The IHLP2525CZER1R5M01 is mainly used in power supplies, DC-DC converters, and switching regulators. In power supplies, the inductor helps to reduce the ripple voltage caused by AC input current and to stabilize the output voltage. The inductor also plays a critical role in DC-DC converters as it acts like a storage device, allowing current to flow in one direction. In switching regulators, the inductor stabilizes the voltage and current of the regulator when the switching elements are off. The IHLP2525CZER1R5M01\'s core is made of ferrite material, and its working principle is based on Faraday\'s law. As current flows through the inductor, a magnetic field is created around the core and the coil. This magnetic field creates a voltage drop, which then pushes electrons in the opposite direction. This oppositely charged electron flow in turn creates a current, which will continue until the magnetic field dissipates. This opposing current is known as the back-up or induced current. In addition to the applications and working mechanisms discussed above, the IHLP2525CZER1R5M01 has several other advantages. The inductor offers high efficiency, with low EMI interference due to its high permeability core material. The inductor is also relatively small, allowing it to be used in tight spaces. Lastly, the IHLP2525CZER1R5M01 inductor operates relatively silently, so its presence will not interfere with acoustics. In conclusion, the IHLP2525CZER1R5M01 is a low profile and high current surface mount inductor which plays an important role in a variety of applications. The inductor is constructed with two parts: the coil and the core. Its core is made of ferrite material, and its working principle is based on Faraday\'s law. It offers several advantages such as high efficiency, low EMI interference, small physical size, and silent operation. As such, the IHLP2525CZER1R5M01 is a must-have component for any electronic circuit design.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description