IL1206AT

Output Type:	Transistor with Base
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1.3V
Current - Output / Channel:	50mA
Voltage - Output (Max):	70V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	3µs, 3µs
Current Transfer Ratio (Max):	125% @ 10mA
Current Transfer Ratio (Min):	63% @ 10mA
Voltage - Isolation:	4000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Transistor, Photovoltaic Output

Opto-isolators or opto couplers are an electrical component that works to isolate an input signal from its corresponding output signal by using light energy. This type of isolation is Highly desirable in sensitive electronics systems where interference prone signals need to be kept isolated from other connected systems.The IL-1206AT is a transistor photovoltaic output opto-isolator designed for use in a variety of applications. It contains an infra-red diode on one side and a phototransistor on the other side. The diode side is responsible for converting electrical energy into light energy while the phototransistor side is responsible for receiving the incoming light energy and converting it back into electrical energy.The main purpose of this opto-isolator is to protect sensitive circuit components from electrical interference. This is because the diode and phototransistor sides of the device are completely isolated from each other, preventing any voltage spikes, electrostatic discharge, or other forms of interference from damaging sensitive components. Additionally, since the transfer between the two sides is done using light energy instead of electrical connections, there is no risk of overvoltage that can be caused by current running through a wire or cable.The IL-1206AT can be used in a variety of applications such as High-Speed Data Links, Multiple Port Isolation, Isolated Voltage Measurement, RS-232 Serial Communication Cable, and Current-Sensing Environment Isolation. In terms of its data transmission capabilities, it is able to transfer signals up to 200kHz with a signal-to-noise ratio of 20V/V. Additionally, the opto-isolator has a operating voltage range of between 8 and 24V and a maximum power dissipation of 150mW.In terms of its working principle, the IL-1206AT consists of a silicon NPN phototransistor with an associated light-sensing diode that transmits light from the diode to the phototransistor. When the phototransistor receives the light from the diode, it produces an output that is proportional to the input light intensity. As a result, any electrical signal that is applied to the diode is transmitted to the phototransistor with no direct connection between the two sides. The end result is complete isolation between the two sides and no risk of any interfering voltage from any other source.The IL-1206AT provides a high level of isolation and is an ideal solution for any application requiring a compact, high-frequency opto-isolator. With its impressive electrical and data transmission capabilities, as well as its ability to protect sensitive circuit components, it is a simple and cost-effective way to ensure isolation between multiple systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description