IL215AT

Output Type:	Transistor with Base
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 100°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	60mA
Voltage - Forward (Vf) (Typ):	1V
Current - Output / Channel:	--
Voltage - Output (Max):	30V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	3µs, 3µs
Current Transfer Ratio (Max):	--
Current Transfer Ratio (Min):	20% @ 1mA
Voltage - Isolation:	4000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

 IL215AT is a type of optoisolator with transistor and photovoltaic output. This type of optoisolator can be used in many applications for providing electrical isolation between circuits, allowing the transmission of digital signals, monitoring, controlling, etc. In this article, we will discuss the applications and working principle of the IL215AT optoisolator.ApplicationsThe IL215AT optoisolator is used in many different applications, such as:

• Providing electrical isolation between two circuits.
• Transmitting digital signals from one device to another.
• Monitoring and controlling the voltage and current in circuits.
• Protecting circuits from overvoltage and overcurrent damage.

This optoisolator is highly reliable and can be used in numerous applications where electrical isolation is needed. It can be used in industrial machines, electrical equipment, home appliances, and many other areas where electrical isolation is required.Working PrincipleIL215AT optoisolator works on the principle of photocoupling. It consists of an infrared LED and a phototransistor connected in series. The infrared LED is driven by an input voltage, which is supplied by the input circuit. When the LED is activated, it emits photons, which are absorbed by the phototransistor. The phototransistor then switches ON and sends out a voltage or a current to the output circuit.The IL215AT optoisolator has two categories of operation modes: single-ended and differential. In single-ended mode, the LED is driven by the same input voltage, which is applied between the LED anode and ground. This mode is mostly used in applications where the input signal is a digital signal. In differential mode, two input voltages are supplied to each LED anode, with one being lower than the other. This mode is used in applications where the input signal is an analog signal, such as in temperature sensing applications.ConclusionThe IL215AT optoisolator provides electrical isolation between two circuits, allowing the transmission of digital or analog signals. It consists of an LED and a phototransistor connected in series and can be operated in single-ended or differential mode, depending on the application. It is widely used in industrial machines, electrical equipment, home appliances, and many other areas.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description