IL710-2E

Common Mode Transient Immunity (Min):	30kV/µs
Supplier Device Package:	8-PDIP
Package / Case:	8-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-40°C ~ 100°C
Voltage - Supply:	3 V ~ 5.5 V
Rise / Fall Time (Typ):	1ns, 1ns
Pulse Width Distortion (Max):	3ns
Propagation Delay tpLH / tpHL (Max):	15ns, 15ns
Data Rate:	110Mbps
Series:	IsoLoop®
Voltage - Isolation:	2500Vrms
Channel Type:	Unidirectional
Inputs - Side 1/Side 2:	1/0
Number of Channels:	1
Isolated Power:	No
Type:	General Purpose
Technology:	GMR (Giant Magnetoresistive)
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction Digital isolators are electrical devices designed to ensure electrical isolation between two connected circuits. Isolation is typically accomplished through the use of high voltage transformers or optical splitters. Digital isolators are commonly used in a variety of applications from medical devices to industrial automation systems to ensure a safe and reliable isolation between the varying power sources and subsystems. In this article, we will discuss the common application fields and working principle of a series of digital isolators, the IL710-2E.Application FieldsThe IL710-2E digital isolator provides isolation between a signal source and an isolated load or sensor. This device is rated for up to 4kV of isolation, making it suitable for use in medical, industrial, and automotive applications. It is commonly used in medical equipment, automotive sensors, factory automation systems, and electronic test and measurement systems where high levels of isolation are required to prevent device failures and to protect people from electrical hazards. The IL710-2E also has the capability to isolate a single channel from up to six different signal sources, making it a versatile solution for a variety of applications. For example, in factory automation systems, the isolator can be used to provide galvanic isolation between the signal source and the monitoring and control systems to ensure that no stray currents flow between the systems. In electronic test and measurement systems, the isolator can be used to safely and reliably transfer analog signals between two systems without inducing any electrical noise.Working PrincipleThe IL710-2E digital isolator works by using a high voltage transformer to safely and reliably transfer a signal from one side to the other while providing isolation between the two sides. Inside the IL710-2E, a primary winding is coupled to the input signal while a secondary winding is connected to the isolated load. A high voltage transformer core is placed between the windings to provide isolation.When the input signal is applied to the primary winding, it induces a corresponding voltage in the secondary winding. This secondary voltage is amplified and used to drive the output signal. The high voltage transformer ensures a complete electrical isolation between the two circuits and any stray currents that may be present between the two systems are kept from flowing across the core. Conclusion The IL7102E digital isolator is commonly used in electronic test and measurement systems, medical equipment, automotive sensors, and factory automation systems due to its high reliability and excellent isolation performance. It offers up to 4kV of isolation between two connected circuits and is capable of isolating a single channel from multiple signal sources. Inside the device, a high voltage transformer creates an isolation barrier between the two circuits to ensure that no stray currents can flow between the two systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description