ILB1206ER801V Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Ferrite Beads and Chips are widely used in applications such as EMI filtering, signal isolation and signal path protection. The ILB1206ER801V is one such component, designed to provide EMI filtering for all three branches of the input power supply. The component works on the principle of inductive filter, involving the use of an inductor and capacitor connected in parallel in order to provide the desired impedance.

The core material used in the construction of the ILB1206ER801V is a ferrite bead. This material is highly effective at absorbing electromagnetic radiation, and is capable of providing an additional layer of protection against EMI. The ferrite bead works on the principle of inductive impedance, where the inductor stores energy in its magnetic field and the capacitor stores energy in its electric field. The inductor and capacitor are then connected in parallel, so that the net power loss caused by the electromagnetic interference is minimized.

The ILB1206ER801V is a high quality, low profile inductive filter, designed to reduce the level of EMI emission coming from the input power supply. It consists of four stages of inductors, and two stages of capacitors, providing a total cutoff frequency of 5MHz. As the inductors increase in frequency, the total EMI attenuation increases as well. By using ferrite beads, the ILB1206ER801V is able to reject EMI signals in the frequency range of 5kHz to 2GHz.

The application field for the ILB1206ER801V is not limited to EMI filter use. It can be used as an RF power amplifier, as a low pass filter, or in many other applications that require inductive filtering. In addition to EMI filtering, it can also be used to minimize high frequency noise in systems, reduce crosstalk issues, and improve the overall signal integrity of the system.

The working principle of the ferrite bead is simple - it absorbs any electromagnetic interference that passes through it, and reduces the overall level of EMI emission. This is accomplished through the use of an inductor and capacitor connected in parallel, which act to create an inductive filter that will absorb any EMI signals in its cutoff frequency range. As the inductors increase in frequency, the total amount of energy that is absorbed also increases, resulting in a reduction in the overall EMI emission.

All in all, the ILB1206ER801V is a great option for applications that require EMI suppression. Its low profile design makes it easy to integrate into existing systems, and its effectiveness when it comes to providing EMI filtering makes it one of the most popular ferrite beads on the market.

The specific data is subject to PDF, and the above content is for reference