Allicdata Part #: | ILQ2-X001-ND |
Manufacturer Part#: |
ILQ2-X001 |
Price: | $ 1.99 |
Product Category: | Isolators |
Manufacturer: | Vishay Semiconductor Opto Division |
Short Description: | OPTOISO 5.3KV 4CH TRANS 16DIP |
More Detail: | Optoisolator Transistor Output 5300Vrms 4 Channel ... |
DataSheet: | ILQ2-X001 Datasheet/PDF |
Quantity: | 690 |
1 +: | $ 1.80180 |
10 +: | $ 1.59579 |
25 +: | $ 1.18390 |
100 +: | $ 1.02942 |
250 +: | $ 0.92648 |
500 +: | $ 0.82354 |
1000 +: | $ 0.70773 |
2500 +: | $ 0.66912 |
5000 +: | $ 0.64339 |
Output Type: | Transistor |
Supplier Device Package: | 16-DIP |
Package / Case: | 16-DIP (0.300", 7.62mm) |
Mounting Type: | Through Hole |
Operating Temperature: | -40°C ~ 100°C |
Vce Saturation (Max): | 400mV |
Current - DC Forward (If) (Max): | 60mA |
Voltage - Forward (Vf) (Typ): | 1.25V |
Current - Output / Channel: | 50mA |
Voltage - Output (Max): | 70V |
Series: | -- |
Input Type: | DC |
Rise / Fall Time (Typ): | 2.6µs, 2.2µs |
Turn On / Turn Off Time (Typ): | 1.2µs, 2.3µs |
Current Transfer Ratio (Max): | 500% @ 10mA |
Current Transfer Ratio (Min): | 100% @ 10mA |
Voltage - Isolation: | 5300Vrms |
Number of Channels: | 4 |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Optoisolators are semiconductor devices used to isolate an electronic circuit from another by optical signals. They are especially great for systems that are subject to possible electrical overloads or disturbances, or for applications that require high levels of noise immunity or transient protection. The ILQ2-X001 is a type of optoisolator device, known as a Transistor, Photovoltaic Output device. This type of device is typically used in analog applications, such as controlling motor speed, auto-ranging systems, and many general-purpose applications.
The ILQ2-X001 is very similar in function to a linear Hall effect sensor. It utilizes a photovoltaic effect to generate its output signal. A photosensitive element inside the optoisolator detects the incident radiation or light, producing a voltage or current, which is then used to activate the output device. This device can be divided into three main sections: the light-emitting diode (LED), the optical detector, and the output driver.
The ILQ2-X001 consists of a high-speed gallium arsenide (GaAs) infrared LED, which emits light when a voltage is applied to its terminals. The LED is surrounded by a set of high-gain photodetectors, which sense the incident light and convert it into an electrical signal. This signal is then used to activate a power MOSFET connected to the device’s output terminal. The MOSFET in turn supplies current to a load connected to the output terminals. The ILQ2-X001 is capable of providing optical isolation between its input and output circuits, thus preventing the effect of electrical surges, noise, and other disturbances in one circuit on the other.
The operation of the ILQ2-X001 is very straightforward. A voltage signal is applied to the device’s input, causing the LED to light up. This light is then detected by the photodetectors, which in turn generates a corresponding electrical signal. This signal is then used to activate the MOSFET, which supplies current to the output load. The ILQ2-X001 can thus be used to separate and control the voltage and current of two circuits, allowing for more precise control of electronic devices.
The ILQ2-X001 is well suited to applications such as motor speed control, auto-ranging systems, analog signal conditioning, and general purpose applications. This device is also popularly used in motion sensors, solenoid valves, and other systems that require precise control of motion, volume, or speed. The ILQ2-X001’s isolation feature makes it an ideal choice for many of these applications, as it can help prevent electrical surges, noise, and other disturbances from spoiling the signal.
The ILQ2-X001 is a versatile optoisolator device that can be used in a wide variety of applications. Its optical isolation capabilities make it particularly useful in applications that require precise control of motion, volume, or speed. Furthermore, its ability to separate voltage and current signals makes it a great choice for applications such as motor speed control, auto-ranging systems, and analog signal conditioning. In conclusion, the ILQ2-X001 is an invaluable optoisolator device that can be used in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ILQ2-X001 | Vishay Semic... | 1.99 $ | 690 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X009T | Vishay Semic... | 0.84 $ | 1500 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X006 | Vishay Semic... | 0.78 $ | 1000 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X007 | Vishay Semic... | 0.78 $ | 1000 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X016 | Vishay Semic... | 0.8 $ | 1000 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X017 | Vishay Semic... | 0.8 $ | 1000 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X007T | Vishay Semic... | 0.84 $ | 1000 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X017T | Vishay Semic... | 0.85 $ | 1000 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2 | Vishay Semic... | -- | 6752 | OPTOISO 5.3KV 4CH TRANS 1... |
ILQ2-X009 | Vishay Semic... | 1.99 $ | 2234 | OPTOISO 5.3KV 4CH TRANS 1... |
OPTOISO 5.3KV TRANS W/BASE 6DIPOptoisola...
OPTOISOLTR 5KV TRANSISTOR 4-SMDOptoisola...
OPTOISOLTR 5KV DARLINGTON 4-SMDOptoisola...
OPTOISOLATOR 5KV DARLINGTON 4SMDOptoisol...
OPTOISO 4.17KV TRANS 6DIPOptoisolator Tr...
OPTOISO 5.3KV TRANSISTOR 4SMDOptoisolato...