Allicdata Part #: | 296-48233-ND |
Manufacturer Part#: |
IMETER-BOOST |
Price: | $ 14.53 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Texas Instruments |
Short Description: | IMETER LAUNCHPAD BOOSTERPACK |
More Detail: | CC3200, INA226 Current/Voltage Monitor Power Manag... |
DataSheet: | IMETER-BOOST Datasheet/PDF |
Quantity: | 23 |
1 +: | $ 13.07880 |
Series: | -- |
Part Status: | Active |
Platform: | LaunchPad™ |
Type: | Power Management |
Function: | Current/Voltage Monitor |
Utilized IC / Part: | CC3200, INA226 |
Contents: | Board(s) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The IMETER-BOOST is a type of daughter card. Daughter cards are expansion boards that typically add additional functionality to a board system. IMETER-Boost has the capability of boosting the signal of a General Purpose Input/Output (GPIO) circuit that is generated from an external switch, a GPIO pin or even an SPI interface. This daughter card enables users to increase the range of a signal and transmission rate of common hardware components.
The principle of IMETER-BOOST is simple and consists of four steps. Firstly, an input signal is received from a GPIO pin, an external switch or an SPI interface. Secondly, this input signal is processed with the on-board ICs. The third step is the amplification of the processed signal, which is done by driving the boost circuit. Finally, the amplified signal is sent to its intended destination. This four-step principle ensures that the signal is strengthened and its range extended.
Evaluation boards are a type of expansion boards used for testing and analyzing signal transfer characteristics. Many evaluation board makers offer daughter cards to extend the functionality of their respective boards. The IMETER-BOOST daughter card to be used for an evaluation board must be designed to the specification of the board maker. For example, if the evaluation board is built with a digital power supply, then the daughter card must also be designed to match the footprint of the board.
The primary application area of the IMETER-BOOST is in the transmission of data between two devices. This daughter card can be used in various scenarios, including boosting the signal of a GPIO pin or an external switch, increasing the transmission rates of components in a network and amplifying signals for embedded devices. Furthermore, it can also be used in applications such as signal shift registers, data synchronization and signal conditioning.
In summary, IMETER-BOOST is a type of daughter card which is a type of expansion board that adds additional functionality to an evaluation board. It is known for its ability to boost the signal of an input, such as a GPIO pin, and extend its range. Furthermore, the IMETER-BOOST has a wide range of applications, including signal shift registers, data synchronization and signal conditioning.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
IMETER-BOOST | Texas Instru... | 14.53 $ | 23 | IMETER LAUNCHPAD BOOSTERP... |
S-8541D00FN-IMET2G | ABLIC U.S.A.... | 0.51 $ | 1000 | IC REG CTRLR BUCK 8MSOPBu... |
PROTO SHIELD REV3 (ASSEMBLED)Plated Thro...
TESSEL RFID MODULEPN532 RFID Reader RF T...
DFRDUINO GPS SHIELD FOR ARDUINOLEA-6H GP...
DIGI POT 3 CLICKAD5321 Digital Potentiom...
BOOST CLICKMIC2606YML Voltage Interface ...
MIC24045 CLICKMIC24045 Power Supply Powe...