INA118UG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA118UG4 is an instrumentation amplifier and part of the industry standard INA118 amplifier series. It is a unity gain and low power instrumentation amplifier which is ideal for cost sensitive applications including precision transducer measurements, force balance reads, and low frequency AC coupling. This amplifier provides high common mode rejection, low offset voltage, and low noise performance. It is offered in four configurations: 1 mV/V voltage input, 0.1 mV/V voltage input, current input, and 3 mV/V voltage input. The INA118UG4 is available in the 16-pin PTC, SOT-23, and SOIC packages.

The INA118UG4\'s application fields include use in medical, process control, as well as industrial applications. It can be used to measure low-level signals such as medical signals, temperature and pressure transducers, as well as low-power ground sensing and strain-gage bridges. Its precision characteristics make it ideal for use in medical diagnostic equipment, industrial process control where linearity, drift and temperature effects must be minimized. Its high common-mode rejection ratio makes it ideal for use in low-signal level measurements. Its low current consumption and low noise make it suitable for use in systems where battery-powered operation is required. In addition, its programmable intelligent current source can be used in applications such as dynamic resistance measurements and impedance-based transducer linearization.

The working principle of the INA118UG4 is based on the non-inverting amplifier configuration. It uses two opposite-phase input signals that are applied to the non-inverting and inverting inputs of the amplifier. The amplifier then amplifies the difference between the two input signals and generates an output signal which is proportional to the difference between the two signals. The feedback loop ensures that the output is a stable and accurate measure of the difference between the two signals.

The INA118UG4 features a wide bandwidth, low input bias current, low input offset voltage, and low output noise. It also provides offset nulling capability and programmable current source. The instrumentation amplifier features very good common-mode rejection in the range of 78 dB. It has a low operating power of 1.8 mW, and a typical gain of 4. Additionally, the amplifier is offered with a temperature range of -40°C to +125°C.

The INA118UG4 from Texas Instruments is a great choice for those looking for a unity gain and low power instrumentation amplifier with great performance in cost-sensitive applications. The wide range of features and its excellent common mode rejection ratio make INA118UG4 suitable for use in medical, process control, and industrial applications where high common mode rejection is required.

The specific data is subject to PDF, and the above content is for reference