INA126UG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The INA126UG4 is a low-noise, low power, differential amplifier. It is commonly used in instrumentation and process control applications. It features high common mode rejection and excellent temperature stability, making it an ideal choice for use in process control and laboratory equipment. The INA126UG4 is also suitable for use in low-level audio and communication equipment. As an operational amplifier, the INA126UG4 provides a wide range of input, output, and power supply voltage ranges to meet the needs of various applications.

The INA126UG4 is based on an open-loop, differential amplifier design. This design consists of two input terminals and two output terminals, referred to as minus and plus. The plus terminal is typically connected to the source of the signal, while the minus terminal usually connects to the load or ground. The gain of the differential amplifier is determined by the ratio of the external resistances between the input and output terminals. Typically, the gains can range from 0 to 40 dB.

The INA126UG4 is capable of providing excellent noise rejection, low power consumption, and wide dynamic range. It has a low cut-off frequency of 6 Hz, and its maximum output of 15 mVpp is suitable for low-level audio and RF applications. Furthermore, the device also has a low power consumption of only 0.5 mA, making it ideal for use in power-sensitive applications.

The INA126UG4 features a single high-impedance differential input, which allows it to be used with signals that are in the range of 100 Hz to 500 kHz. Additionally, its high common-mode rejection ratio of 90 dB guarantees that noise and other interferences will be significantly reduced. Also, the device is capable of operating over a wide range of ±15 V to ±18V, making it compatible with a variety of power supplies.

The INA126UG4 is designed for low current applications and provides a low input bias current of up to 1 nA. This makes it ideal for use in low-bias applications such as pulse-width modulation and current loop projects. The power supply rejection ratio is also quite high, reaching up to 40 dB. This makes the INA126UG4 highly resistant to power supply-related noise.

The INA126UG4 is a great choice for use in system control, instrumentation, and high-accuracy process control applications. It is especially suited for use in data acquisition systems, communication systems, and audio applications. Its high open-loop gain, low power consumption, wide operating temperature range, and low noise make it an ideal solution for these applications. Furthermore, it is available in a variety of packages, making it simple to integrate into any system.

The specific data is subject to PDF, and the above content is for reference