INA2128U

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

INA2128U is a dual operational amplifier which uses JFET and Bipolar junction transistor technologies. It is a high precision, low noise device which is designed for a range of different applications including instrumentation amplifiers, buffers, and linear amplifiers. The performance of the INA2128U can be tailored to the specific application by selecting the appropriate device variant and by trimming the reference voltage.

The INA2128U is essentially two amplifiers which share a common power supply. Each of these amplifiers has two outputs, a non-inverting output and an inverting output. The non-inverting output is driven by an operational amplifier which has a gain of unity. The inverting output is driven by a complementary amplifier which has a gain of two.

The INA2128U is used primarily as an instrumentation amplifier. This is a type of amplifier which is used to measure the value of a signal. Normally two inputs are applied to the device, one input is a reference voltage, and the other is a signal to be measured. The difference between the two inputs is amplified by the device and then presented at the output as an amplified signal. The gain of the device can be adjusted by varying the reference voltage.

The INA2128U is also used as a buffer amplifier. A buffer amplifier is used to isolate an input signal from a load. The buffer amplifier presents a low impedance load which is connected to the input signal. When the load is connected to the buffer outputs, the load will not draw power from the input. This allows the input to be used without the detriment of the output signal being diminished.

The last application for the INA2128U is a linear amplifier. The linear amplifier is used to amplify a signal in order to increase the power of the signal. The INA2128U has a gain of up to five which can be adjusted by varying the reference voltage. This allows for a wide range of applications which require a convenient and reliable linear amplifier.

The working principle of the INA2128U is relatively simple. The inputs are applied to the non-inverting and inverting inputs of the two amplifiers. Common mode signals are then rejected by the device’s common mode rejection ration. The two outputs are then driven by the amplifier, producing a differential output. The gain of the device can be adjusted by varying the reference voltage.

In conclusion, the INA2128U is a versatile dual operational amplifier which can be used as an instrumentation amplifier, buffer amplifier, and linear amplifier. The device is capable of producing high precision, low noise outputs, and the gain can be adjusted to suit the specific application. The working principle of the INA2128U is based on the non-inverting and inverting inputs being applied to the two amplifiers, which then drives the differential outputs. The reference voltage can then be adjusted to tailor the gain.

The specific data is subject to PDF, and the above content is for reference