IPAH-11-1-62-30.0-A-01 Circuit Protection

Series:	IPA
Part Status:	Active
Lead Free Status / RoHS Status:	--
Breaker Type:	Magnetic (Hydraulic Delay)
Moisture Sensitivity Level (MSL):	--
Current Rating:	30A
Number of Poles:	2
Actuator Type:	Lever
Illumination:	--
Illumination Voltage (Nominal):	--
Mounting Type:	Panel Mount

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Circuit breakers are devices designed to protect electric circuits from damage due to overload or short-circuiting. Installed in an electrical panel, they protect entire circuits from excessive currents and protect equipment and wiring from damage. The application field and working principle of IPAH-11-1-62-30.0-A-01 Circuit Breaker are described below.

Application Field of IPAH-11-1-62-30.0-A-01 Circuit Breaker

IPAH-11-1-62-30.0-A-01 Circuit Breaker is a type of circuit breaker that can be used in a variety of applications. It is particularly suitable for residential and commercial applications, such as protecting lighting circuits and small motor circuits. It can be used for applications such as controlling the circuit for an electric water heater, a dishwasher, an oven, or a garage door opener. It is also suitable for protecting upstream circuits from fault currents.

Working Principle of IPAH-11-1-62-30.0-A-01 Circuit Breaker

IPAH-11-1-62-30.0-A-01 Circuit Breaker operates by detecting changes in the current passing through a circuit. When the current level in the circuit increases beyond a certain point, the circuit breaker senses the change and trips to open, disconnecting the current flow. The circuit breaker has a specific, adjustable trip point, based on the current rating of the circuit, that can be adjusted. After the circuit breaker trips, it can be reset by pressing the reset button.A circuit breaker is designed to protect the circuit in two ways. First, it prevents current levels from exceeding safe levels by automatically disconnecting the circuit when an overload occurs. Second, it helps prevent fires by cutting off the electricity before it can cause heat buildup in wires or other components. It is important to note that the circuit breaker does not protect against short circuits, which are caused by a bridge between two wires or by a failure in a wire or component.

Conclusion

IPAH-11-1-62-30.0-A-01 Circuit Breaker is a type of circuit breaker that is suitable for residential and commercial applications. It provides protection from overload or short-circuiting by automatically disconnecting the circuit. The circuit breaker has an adjustable trip point that can be set based on the current rating of the circuit. The circuit breaker is designed to protect the circuit from high current levels and to prevent fires by cutting off the electricity before it can cause heat buildup.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description