Current - Output (Max):	3A
Control Features:	Enable, Active High
Size / Dimension:	0.70" L x 0.31" W x 0.65" H (17.8mm x 7.9mm x 16.5mm)
Package / Case:	5-SIP Module
Mounting Type:	Through Hole
Efficiency:	85%
Operating Temperature:	-40°C ~ 125°C
Features:	Remote On/Off, OCP, SCP, UVLO
Applications:	ITE (Commercial)
Power (Watts):	7.5W
Series:	Delphi IPM24S
Voltage - Output 3:	--
Voltage - Output 2:	--
Voltage - Output 1:	1.2 ~ 2.5 V
Voltage - Input (Max):	36V
Voltage - Input (Min):	8V
Number of Outputs:	1
Type:	Non-Isolated PoL Module
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to IPM24S0A0R03FA

DC to DC converters have become an integral part of modern technology, and the IPM24S0A0R03FA is no exception. This particular device is used to convert direct current (DC) to an alternating current (AC), usually for the purpose of generating power for various applications. This article will discuss the important elements of the IPM24S0A0R03FA, its application field and working principle.

Essential Components of the IPM24S0A0R03FA

The IPM24S0A0R03FA features a switch-mode power supply that uses a switching metal oxide semiconductor (MOSFET) to efficiently convert DC voltage into the required AC output voltage. It also has an inductor and a capacitor to smooth out the voltage and regulation of current during the process of conversion. Additionally, the IPM24S0A0R03FA contains a controller IC (integrated circuit), which monitors the input and output voltage, and adjusts the MOSFETs appropriately.

Application Field and Working Principle of IPM24S0A0R03FA

The IPM24S0A0R03FA is used in a wide range of applications, including industrial, telecommunication, medical, and automotive systems. The device’s capacity ranges from 10A to 30A, and its wide input voltage range makes it suitable for use with different battery configurations. The IPM24S0A0R03FA operates on a closed-loop system, where a controller IC monitors the input and output voltages. When the input voltage is higher than the output voltage, the IC signals a charge pump to deliver the output voltage to the FET (Field Effect Transistor), which will reduce the current flow. Once the output voltage matches the input voltage, the FET will close, thus keeping the voltage at the desired level. This cycle will continue until the input voltage falls below the output voltage, in which case the IC will signal the charge pump to close and the FET to open. As a result, the current will flow back to the input and replenish the voltage levels. The IPM24S0A0R03FA also has protection features, including over-voltage protection, thermal shut-down, and short-circuit protection. These protections help to ensure the device operates safely and effectively.

Conclusion

In conclusion, the IPM24S0A0R03FA is a versatile and reliable device for converting DC voltage into the necessary AC output voltage, and can be used in a variety of applications. It is an efficient switch-mode power supply that is robust and highly reliable, and also features a number of protection features to ensure its safe operation.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description