IQ1512S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC converters are power supply components used to convert a DC input voltage to a different DC output voltage. As the name implies, the IQ1512S is a DC-DC converter designed for use in a wide variety of applications. This article will discuss the application field and working principle of this device.

The IQ1512S is an integrated, adjustable point-of-load DC-DC converter capable of delivering up to 15A of continuous output current. It operates from 4.75V to 14V input voltages and provides an adjustable output voltage from 0.8V to VIN. The device features a PWM ramp modulation technique coupled with an active clamping circuit to reduce the switching losses. The operating frequency of the converter can be adjusted from 200 kHz to 1.2 MHz with a 0-5V control voltage. The device also includes on-chip power MOSFETs, an advanced current mode control loop with cycle-by-cycle current limiting, and an internal slope compensation circuit.

The IQ1512S has a wide range of applications, including battery backup systems, charging systems, automotive systems, industrial systems, and telecom applications. Because it is a point-of-load device, it is well suited for applications in which a high step down ratio is required. The device can also be used in applications in which a low output voltage is needed, such as powering microprocessors. Additionally, the device\'s wide range of operating frequencies makes it suitable for a variety of switching power supply applications.

The IQ1512S converts an input voltage to a lower or higher output voltage by using an internal oscillator to produce a periodic switching signal. This alternating signal is used to turn the internal MOSFETs on and off in a controlled manner. During the on state, the inductor current flowing through the MOSFETs is limited to the maximum current set by the external resistor RINT. As the MOSFET turns off, the inductor current is charged to the output capacitor and the output voltage is regulated.

The IQ1512S also incorporates an active clamping circuit to minimize switching losses. The active clamping circuit detects the voltage of the source and the inductor current, and adjusts the voltage level of the drain of the MOSFETs accordingly. This ensures that the voltage across the MOSFETs is minimized during the switching period.

In summary, the IQ1512S is a DC-DC converter with wide application field and advanced working principle. It enables users to accurately adjust the output voltage from 0.8V to VIN. The device integrates power MOSFETs, an active clamping circuit, and its adjustable frequency range from 200 kHz to 1.2 MHz makes it suitable for a variety of applications. This device is also suitable for applications requiring high step down ratios and low output voltages.

The specific data is subject to PDF, and the above content is for reference