IR3536MGB01TRP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

IR3536MGB01TRP Voltage Regulator is a component among a variety of Special Purpose voltage regulators. It is a power integrated circuit (IC) intended for the control of voltage output, current, and related applications in systems with a single supply. The component is developed by international semiconductor company, Infineon. It is typically used in a series of applications such as automotive, industrial and consumer applications. Additionally, it is widely utilized in high power consumption applications.

This component has several characteristics that enable it to be used in numerous applications. It is characterized by having a low quiescent current of 2.5mA and an operating voltage range of 4.7V to 60V. It also has a slew rate that is adjustable from 2V/μs to 20V/μs along with a low dropout voltage of 150mV. Moreover, it features Enable1 and Enable2 pins that can be used to supply a low-voltage signal, providing further protection and enabling further control of the outputs. This particular Power Management IC (PMIC) is designed for applications with limited board space, featuring a thermally-enhanced SOT223 PowerPAK package with an extremely small footprint.

The main purpose of these Special Purpose Voltage Regulators is to provide an adjustable, regulated voltage output from a non-isolated input voltage source. The input source can come from a DC voltage source, a linear voltage regulator, or from a switched-mode power supply. The feature that makes this component so useful is its ability to provide predictable, reliable and accurate output voltages which are free from noise and ripple. By coupling it with other components such as Optocouplers, MOSFETs, and current-limiting resistors, it is possible to raise, lower, and accurately regulate the output voltages.

In regards to its working principle, the IR3536MGB01TRP follows the standard working principle upon which all voltage regulators are based, namely the voltage feedbackloop. This feedback loop ensures that the output voltage remains within an acceptable range despite changes in the load on the output. The feedback loop contains several elements such as a reference voltage source, a voltage feedback amplifier to compare the measured output voltage with the reference voltage source, and an output stage comprising of transistors, field effect transistors (FETs), or operational amplifiers (op-amps).

In the case of the IR3536MGB01TRP, the reference voltage source is supplied externally and the amplifier is an internally designed error amplifier. The amplifier compares the reference voltage to the output voltage through a voltage divider network and then adjusts the output voltage accordingly. Once the actual output voltage is equal to the reference voltage, the amplifier turns off the output stage and puts the regulator into standby mode, where the output voltage is regulated and held within a certain tolerance range while minimizing the power used by the regulator.

In conclusion, the IR3536MGB01TRP is a Special Purpose Voltage Regulator that provides an adjustable and regulated output voltage from a non-isolated input voltage source. It is characterized by its low quiescent current, operating voltage range, slew rate and low dropout voltage which make it suitable to a range of applications across automotive, industrial, and consumer applications. It works by using the feedback loop principle in which its internal error amplifier compares the reference voltage to the output voltage and adjusts the output voltage accordingly.

The specific data is subject to PDF, and the above content is for reference