Voltage - Output 3:	--
Control Features:	--
Size / Dimension:	0.50" L x 0.44" W x 0.29" H (12.7mm x 11.2mm x 7.3mm)
Package / Case:	8-SMD Module, 5 Leads
Mounting Type:	Surface Mount
Efficiency:	80%
Operating Temperature:	-40°C ~ 105°C
Features:	SCP
Applications:	ITE (Commercial)
Voltage - Isolation:	1.5kV
Power (Watts):	1W
Current - Output (Max):	42mA
Series:	ISE
Voltage - Output 2:	--
Voltage - Output 1:	24V
Voltage - Input (Max):	5.5V
Voltage - Input (Min):	4.5V
Number of Outputs:	1
Type:	Isolated Module
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters: ISE0524A Application Field and Working Principle

The ISE0524A is a DC-DC converter designed for a range of uses from automotive and industrial applications to portable consumer electronics. This particular converter is renowned for its wide input voltage range, high power conversion efficiency and high reliability. It is also highly configurable, allowing adaptation to multiple applications and requirements.In this article we will examine the application field and working principle of the ISE0524A DC-DC Converter. We will begin with a description of the types of applications best suited to the converter, followed by a look at the key components and how they interact.The ISE0524A is ideal for applications where even small power output is required, such as battery-operated systems. This is because it is capable of operating in both Constant Voltage and Constant Current modes, depending on the requirements of the application. Other types of applications ideally suited to the ISE0524A include motor drives, power supplies for consumer electronics and power conversion in automotive applications.The basic block diagram of an ISE0524A DC-DC converter is composed of two major components - the control circuitry and the power conversion circuitry. The control circuitry consists of a Pulse-Width Modulation (PWM) controller and an Error Amplifier (EA). The PWM controller is responsible for controlling the switching frequency of the power conversion circuitry. The Error Amplifier (EA) measures the output voltage and compares it against a preset voltage reference. If the output voltage is higher than the reference, the EA decreases the PWM duty cycle, and vice versa. This constant vigilance ensures that the output voltage is kept within the specified range.The power conversion stage consists of a totem-pole power stage, composed of a high-side switch (HSW) and a low-side switch (LSW). The HSW and the LSW are both switches which control the current flowing out of the converter. The High-side switch is controlled directly by the PWM controller, while the Low-side switch is controlled through a low-side-over-voltage-protection (LTOV) circuit. In addition, a synchronous rectifier (SR) is used to reduce power loss during the switching process.When considered in whole the ISE0524A converter functions as follows. The PWM controller generates a square wave with a frequency that is proportional to the output current. The PWM duty cycle controls the on time of the High-Side switch. The Low-Side switch is controlled via the LTOV circuit. When the High-Side switch is on, the current flows from the input to the output and is rectified by the synchronous rectifier and stored in the output capacitor. When the High-Side switch and the synchronous rectifier are off, the Low-Side switch controls the current flow from the output to the ground. The output voltage is monitored by the Error Amplifier and the PWM duty cycle is adjusted according to the output voltage. The whole process repeated continuously allowing the ISE0524A to provide highly reliable, regulated output voltage.In conclusion, the ISE0524A provides highly reliable and easily configurable power conversion with excellent efficiency, making it an ideal choice for applications requiring small output power. Its wide input voltage range, high-reliability and small size make it ideal for use in battery-powered applications, motor-drives and automotive electronics. The key components and control circuitry work together to ensure the output voltage remains within the specified range. By understanding the application field and working principle of this versatile DC-DC converter, users can make the most of the many benefits it provides.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description