ISL28113FEZ-T7A

Voltage - Input Offset:	500µV
Base Part Number:	ISL28113
Supplier Device Package:	SC-70-5
Package / Case:	5-TSSOP, SC-70-5, SOT-353
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply, Single/Dual (±):	1.8 V ~ 5.5 V
Current - Output / Channel:	22mA
Current - Supply:	90µA
Series:	--
Current - Input Bias:	3pA
Gain Bandwidth Product:	2MHz
Slew Rate:	1 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	1
Amplifier Type:	General Purpose
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ISL28113FEZ-T7A is a dual monolithic instrumentation amplifier and is part of Intersil’s family of precision linear ICs. The IC is designed to offer a low-cost, low-power and versatile solution for signal conditioning applications. It is well-suited for use in a wide variety of high-precision instrumentation, including medical and industrial test equipment, industrial process control, high-quality audio and direct digital synthesis (DDS) applications.The ISL28113FEZ-T7A consists of a low-noise differential amplifier stage that is followed by a precision secondary gain stage optimized for low power consumption. The differential amplifier is capable of providing high accuracy gain and high noise rejection ratios. The gain of the amplifier is set by two external resistors. The amplifier’s output is latched with an open-collector output stage for interface with other ICs.The IC also features an EMI hardening latch enable control. The ISL28113FEZ-T7A is ideal for low noise applications where precision gain accuracy is critical. It offers low input noise, low output noise and low power consumption. It also features a latch enable control that can be used to reduce EMI noise. The device features an internal heat sink for improved power dissipation and has a low input bias current for improved accuracy. ISL28113FEZ-T7A is an instrumental amplifier with a wide range of applications, including medical and industrial test equipment, industrial process control, high-quality audio and direct digital synthesis (DDS). It offers a low-cost, low-power and versatile solution for signal conditioning applications. Its differential amplifier stage is capable of providing high accuracy gain and high noise rejection ratios while its precision secondary gain stage is optimized for low power consumption. It also features a latch enable control that can be used to reduce EMI noise. The device also has an internal heat sink for improved power dissipation and a low input bias current for improved accuracy. ISL28113FEZ-T7A is most effectively used to construct low noise, low power, precision, single-ended instrumentation amplifiers. It can also be used in a variety of other signal conditioning applications such as pulse width modulation (PWM) control, amplifier gain setting and active filter designs. The device is ideally suited for precision measurements in medical, industrial and scientific applications.The ISL28113FEZ-T7A utilizes a common mode input of up to 100V with a minimum CMRR of 80dB. An internal bias network provides a low input bias current of approximately 1nA over the entire temperature range and a low offset voltage drift of less than 10uV/℃. The device has an internal heat sink which allows it to dissipate power dissipation in the range of 0.5W to 1W. In terms of operation, the ISL28113FEZ-T7A uses a gain of two and a unity gain differential amplifier stage, followed by a precision secondary gain stage optimized for low power consumption. The gain of the amplifier is set by two external resistors and the output is fed through a latchable open-collector output stage. The device also features an EMI hardening latch enable pin to further reduce noise and provide a level of protection from EMI. The ISL28113FEZ-T7A is an all-in-one, low-cost, low-power and versatile instrumentation amplifier, perfectly suited for a wide range of precision measurements. Its dual monolithic design enables greater accuracy and lower power consumption with a low input bias current for improved accuracy. The device also features a latch enable pin to further reduce noise and provide a level of protection from EMI.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description