ISM480F1-C4.3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF Receivers, or Radio Frequency Receivers, are devices that are used to receive and process signals at radio frequency (RF) frequencies. An RF Receiver typically consists of an antenna, amplifier, local oscillator, frequency mixer, filter, and demodulator, among other components. The ISM480F1-C4.3 is a high performance, low-noise RF Receiver designed for use in a variety of applications.

The ISM480F1-C4.3 can be used in applications such as automotive, consumer electronics, medical, industrial, and military. It operates in the 902-928 MHz band, providing a wide tuning range and making it suitable for a variety of uses. It is also capable of receiving and processing modulated signals, allowing it to be used for data transmission applications. The device also features a low-noise figure, which helps it to achieve a high signal-to-noise ratio and good reception quality.

The ISM480F1-C4.3 operates on a frequency-modulated (FM) or a frequency-shift keyed (FSK) modulation format. FM modulation is a type of modulation used to transmit information over a carrier signal, while FSK modulation is a type of modulation used to send information over a broadcast system. The modulation formats are chosen based on the type of application the device is being used for.

The ISM480F1-C4.3 utilizes a superheterodyne receiver architecture, which is a type of receiver architecture commonly used in RF receivers. In the superheterodyne receiver architecture, a signal is received by an antenna, amplified, filtered and then sent to a local oscillator. The local oscillator converts the signal to a different frequency, which is then sent to a mixer to mix the output of the local oscillator with the input signal. The mixer produces an intermediate frequency (IF) signal, which is then filtered, amplified, and demodulated to extract the data from the signal.

The ISM480F1-C4.3 features a low-noise preamplifier, which helps to reduce the noise signals in the received signal before it is sent to the other stages of the receiver. The amplifier also helps to increase the overall sensitivity of the receiver, which helps to reduce any potential noise in the output signal. The device also utilizes a digital automatic gain control (AGC) circuit, which helps to balance the gain of the amplifier to ensure optimal performance.

The ISM480F1-C4.3 also features selectivity, which allows it to receive signals from multiple sources while still rejecting any other signals in the vicinity. The selectivity is achieved by means of a bandpass filter, which helps to reject out-of-band signals and reduce interference from adjacent channels. The device also features pulse shaping and waveform filtering functions, which help to reduce the noise in the received signal and improve reception quality.

Overall, the ISM480F1-C4.3 is a reliable and highly efficient RF Receiver that can be used in a variety of applications, ranging from automotive and consumer electronics to medical and military. It features a wide tuning range, low noise figure, selectivity, and digital AGC, which makes it suitable for a variety of applications. Additionally, the device utilizes a superheterodyne receiver architecture, which helps to improve reception performance. This makes it an ideal choice for applications that require high performance RF Receivers.

The specific data is subject to PDF, and the above content is for reference