ISO721DR Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators are electronic systems used to prevent digital signals from leaking across electrical circuits. They can be either integrated into integrated circuits (ICs), or can be stand-alone devices. Digital isolators are mainly used to protect the target circuitry of a system from electrical faults and interference. The typical working voltage of digital isolators is about 5V, and the digit isolator\'s operating temperature range is usually 0°C to 70°C.

ISO721DR is a digital isolator based on the I²C (Inter-Integrated Circuit) protocol. It is a bidirectional, single channel, digital electric connection designed to protect digital signals (data, clock, and enable) from noise and other interference. It is widely used in many applications, such as industrial control, automotive, medical instrumentation, and consumer electronics.

The ISO721DR works by electrically isolating two circuits from each other. It consists of two halves: the drive side and the receive side. The device uses a digital magnetic core to physically separate the two sides by providing an insulation barrier between them. On the drive side, the data and clock signals are encoded onto the magnetic core, and are then decoded on the receive side using an opposite polarity magnet. This ensures that any interference from the outside environment is blocked, while the data and clock signals remain intact.

The ISO721DR works in two modes: DIGITAL HIGH (DH) and DIGITAL LOW (DL). In the DH mode, it is used for transmitting data and clock signals in two directions between two circuits. The DH mode is mainly used in digital control systems, such as industrial automation systems. In the DL mode, it is used for transmitting data and clock signals in one direction between two circuits. The DL mode is mainly used in power control systems, such as automotive systems.

The ISO721DR is equipped with an elaborate set of features and options that make it suitable for a wide range of applications. It has a wide operating temperature range (-40°C to 105°C), as well as a wide operating voltage range (3V to 32V). The device is also digitally programmable, allowing users to adjust many of its parameters, such as the data rate, the clock rate, the frequency, and the duty cycle. It also has a wide range of built-in safety features, such as an over-current protection, a temperature-sensing system, and a power-down mode.

In conclusion, the ISO721DR is a versatile digital isolator that provides excellent signal protection and isolation in a wide range of applications. It features a high level of flexibility, allowing users to customize their systems to suit their specific needs. Its intuitive design makes it easy to use and set up, and its wide operating temperature and voltage ranges make it suitable for both industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference