ISO7220BDRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital Isolators are used in a variety of applications to increase the safety of circuits while allowing them to communicate and interact with one another. The ISO7220BDRG4 is specifically designed for digital isolation in two-wire bus systems such as SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit).

The ISO7220BDRG4 provides a transmission channel between two buses that is electrically isolated from both. This means that the power on one bus does not have to be the same as the other, and that each can be powered independently, providing the necessary safety isolation.

The ISO7220BDRG4\'s isolation is provided by a bidirectional non-magnetic isolator with an operating voltage of 5.5Vdc. This voltage is then used to drive the internal circuitry, which in turn drives the two digital buses. This isolator is designed to provide an isolation of up to 500VDC, ensuring that the bus system is completely isolated from one another and safe to use.

The internal circuitry of the ISO7220BDRG4 consists of a pair of CMOS logic gates, one for transmitting and one for receiving. These logic gates are used to control the signal transmission between the two buses, and to ensure that the signals are properly formatted and transmitted correctly. The internal clock and data signals are also generated internally, allowing the ISO7220BDRG4 to act as a digital isolator.

The ISO7220BDRG4 is designed to isolate the bidirectional data streams between two bus systems, and to provide noise immunity for the data being passed between them. By providing an insulation layer between the two buses, it can help to reduce errors or noise that could otherwise compromise the accuracy of their communication.

The ISO7220BDRG4 is also designed to be relatively low power. The logic gates used consume less power than traditional isolation devices, allowing the ISO7220BDRG4 to be used in battery-powered and/or low power applications.

The ISO7220BDRG4 provides an ideal solution for digital isolation in two-wire bus systems, such as SPI and I2C. It has a wide range of applications, including isolated measurement and control, RF/microwave communications, motor and power-line control systems. The ISO7220BDRG4 is also ideal for use in industrial automation and control systems, providing an additional layer of isolation and safety.

The specific data is subject to PDF, and the above content is for reference