Allicdata Part #: | ITA-3630-01A1E-ND |
Manufacturer Part#: |
ITA-3630-01A1E |
Price: | $ 0.69 |
Product Category: | Uncategorized |
Manufacturer: | Advantech Corp |
Short Description: | ITA-3630 W/I5-3610ME+HM76 W/CF B |
More Detail: | N/A |
DataSheet: | ITA-3630-01A1E Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 0.63000 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
。The ITA-3630-01A1E is a subsea high-performance acoustic Doppler current/velocity profiler (ADCP) that is designed for various oceanographic applications. It is designed to operate autonomously in time-series deployments down to depths of 1500 meters. It is powered by a 12VDC power supply and has a small form factor and low power consumption. The ITA-3630-01A1E is designed for long-term deployments in the field, such as in coastal engineering studies, monitoring, and research.
The ITA-3630-01A1E utilizes four fixed transducers and a single moving transducer to measure 25 depth bins in the water column simultaneously. It is capable of accurate measurement of ocean currents up to 1.2 m/s. It can also measure the direction and magnitude of the earth’s tides and the current velocity in up to four different directions. The ITA-3630-01A1E is designed to measure water velocity at multiple depths below the sea surface. The ITA-3630-01A1E also has the ability to measure ocean currents at multiple frequencies. The ITA-3630-01A1E is equipped with an integrated compass, altimeter and temperature sensors for accurate navigation.
The ITA-3630-01A1E can be used in a wide range of applications, including ocean modeling, hydrographic survey, coastal engineering, fisheries acoustics, marine geomorphology, and ocean thermodynamics. The ITA-3630-01A1E is designed to be deployable for long-term missions and is reliable, easy to use and affordable. It can also be used in shallow waters as an alternative to traditional single-beam sonar and other acoustic Doppler current profilers.
The ITA-3630-01A1E utilizes a split-beam design which enables it to measure currents up to 1.2 meters per second. This is accomplished by sending a sonar pulse through a moveable transducer suspended in the water column, while four stationary transducers receive the return echoes from the moving transducer. By measuring the time for the signal to travel from the moving transducer to the stationary transducers, the ITA-3630-01A1E can accurately estimate the current velocity. Using this technique, the ITA-3630-01A1E can measure the direction and magnitude of ocean currents at up to four positions in the water column simultaneously.
The ITA-3630-01A1E also includes a built-in compass and barometer. The compass provides an accurate heading and navigation solution. The barometer is used to measure sea level pressure and atmospheric pressure, allowing an accurate estimate of surface current speed, direction, and wave heights. Additionally, the ITA-3630-01A1E can measure temperature, salinity, and conductivity, further enhancing its utility for oceanography studies.
The ITA-3630-01A1E is a versatile, cost-efficient, and reliable device for a wide variety of ocean studies and applications. It is simple to use and can operate in a wide variety of conditions, providing accurate measurements of ocean currents in both shallow and deep waters. The ITA-3630-01A1E is a valuable tool for oceanographers and researchers, and is well-suited for repeat and long-term deployments in the field.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE